edwins vision boards - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 01-20-2006, 11:13 PM #1
spinny2559
just missed 2k4
 
spinny2559's Avatar
 
Join Date: Jan 2005
spinny2559 is a Supporting Member
edwins vision boards

i am looking to get an edwins vision board for a project gun but i see they are most commonly associated with tribals so i decided to come here. anyone have one or know where i can pick one up relativley cheap? also, can anyone tell me information on them or provide pictures of them in guns or anything along those lines?

thanks
__________________

98 Custom Low Pressure Kit parts available, contact me!

TONS of solenoids and solenoid parts F/S/T!!

spinny2559 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 01-21-2006, 08:47 AM #2
goose_u69
 
 
Join Date: May 2005
Location: wisconsin
the board alone is 20.00
an entire kit with switches and the whole nine (breakbeam eyes ) is 35
an entire kit with warloard eye and all that jazz is 55

you can go here

http://www.tribal-paintball.com/products.html

it was specifically designed to work in conjunction with stock v1e tribal boards

i do not know if it will work with other boards and would strongly advise contacting edwin through his parts site to get more information as far as compatability to other markers

i know warped was working on a higher voltage version for angels so you might ask him as well
__________________
Tribal Twister 2.0, palmer rock, lpc, macdev asa, fury
tribal mephisto 2.2, palmer micro rock, aka sidewinder
99 right feed autococker, mostly stock

OLDSCHOOL RULES: ONE SHOT ONE KILL
NEWBS: SPRAY AND PRAY
LETS SEE WHO SCHOOLS WHO
goose_u69 is offline  
Old 01-21-2006, 11:19 PM #3
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
Yeah, they can be adapted to work on other markers, but you'll have to poke around and figure out the correct wiring diagram to attach it to the board. You'll also have to figure out if the transistor used on the board is a high or low signal so you can get the correct ACE board from Edwin.
warpedmephisto is offline  
Old 01-21-2006, 11:35 PM #4
spinny2559
just missed 2k4
 
spinny2559's Avatar
 
Join Date: Jan 2005
spinny2559 is a Supporting Member
The wiring should be no problem, and neither should the voltage, all I need to do is get my hands on one, and I see there are different ones and I do not know which one is best for me (there was the Warlord, and some others, I'm not too familiar with them).
__________________

98 Custom Low Pressure Kit parts available, contact me!

TONS of solenoids and solenoid parts F/S/T!!

spinny2559 is offline  
Old 01-22-2006, 08:48 AM #5
goose_u69
 
 
Join Date: May 2005
Location: wisconsin
the one with the warloard is a large single eye. from what i have heard though the warloard eye has some difficulty picking up dark paint.

i personally would recomend the bbe version which uses 1 emiter and 1 reciever and waits for the beam to be broken by the ball hence the name break beam eyes. As soon as something crosses the line it picks it up.
This is used in many applications including saftey precautions in machine shops. granted a larger version but same priciple. can't go wrong with them in my opinion and their cheeper to boot
__________________
Tribal Twister 2.0, palmer rock, lpc, macdev asa, fury
tribal mephisto 2.2, palmer micro rock, aka sidewinder
99 right feed autococker, mostly stock

OLDSCHOOL RULES: ONE SHOT ONE KILL
NEWBS: SPRAY AND PRAY
LETS SEE WHO SCHOOLS WHO
goose_u69 is offline  
 




Posting Rules
Forum Jump