So you want some Eye Holes....

**Auctionjunkie!** · 06-16-2003, 10:43 PM

AKA has released the technical info for the eye holes.

This is not for someone with a drill press or a Dremel to do. This is for someone with access to a CNC or Vert. Mill.

NOTE!! Improper milling will cause failure of the eyes and may void your warranty.

http://www.dbnpaintball.com/eyes/

Dan

Styles *****ley · 06-17-2003, 01:24 AM

Pie job. I think I have all those tools as well, need too look for the .120 reamer though.

thanks Dan

Ross · 06-19-2003, 12:08 AM

thx soo much, I'm such a tard, I just posted something about this.

Tornado Alley · 06-19-2003, 01:01 AM

Styles If you cant find a .120 reamer let me know I can probably hook you up

Email me if you need one. TornadoAlley@cox.net

jjang2084 · 10-15-2003, 11:42 PM

mike c at splat attack can mill for eye covers for old vikings even the old excals u just gotta pay the $$$

EvilPopTart · 12-13-2003, 10:31 AM

Quote:

Originally posted by Styles *****ley
Pie job. I think I have all those tools as well, need too look for the .120 reamer though.

thanks Dan

styles do you think you could do this at work? I would be willing to pay...

paintballbeaver · 12-25-2003, 11:16 PM

quick question why arent the eye holes in the middle of the feed tube??? (sorry getting ready to do this and it just seemed out of place to have them back so far

gibfather · 01-07-2004, 01:24 AM

Seeing how the link to the zip file doesn't work...can someone give me a link to how much it would cost to put eyes on an older Viking? I'm still learning more about the Viking and would like as much info as I can. Thanks!

kcpaintballer · 01-07-2004, 12:38 PM

if anyone has this file that is apparently gone please email it to travis@demonguns.com

kcpaintballer · 01-07-2004, 12:48 PM

ok here it is guys i just talked to dan... by the way great guy and very helpful. http://www.dbnpaintball.com/eyes/

Tornado Alley · 01-07-2004, 12:49 PM

LOL, I just emailed it to you.

gibfather · 01-07-2004, 01:19 PM

Are there any dealers or techs that would do this for a fee?

Tornado Alley · 01-07-2004, 01:21 PM

I think Destructive Customs is doing it.

gibfather · 01-07-2004, 01:58 PM

Cool...thanks! I've seen some of their work and they look awesome!

wearmypaint · 05-12-2004, 10:58 PM

both links dont work. the first site doesnt work and the second is a invalid or corrupted file.

pbftippmannpimper · 06-05-2004, 04:06 PM

right click on the first link and press save target, than save it to your desktop, its a zip file, not a website

Post-Mortem · 07-19-2004, 11:58 AM

just a stupid question: on an Excalibur 2k3, where to place the hole for the cable to enter in the bottom of the body (to plug it on the board)?
This is not on the schematics of Dan

Thanks a lot

PB_Matrix_Shocker · 01-08-2005, 03:29 AM

I need CAD drawings for the locations of the eye holes and screw holes. Anybody know where I can these?

**Auctionjunkie!** · 01-08-2005, 08:08 AM

http://www.dbnpaintball.com/eyes/ has the info taken from CAD drawings.
Dan

outty · 01-13-2006, 08:40 AM

I sent the drawings to a machinist here in my hometown, it's got everything he needs, but it doesn't say where to drill the hole on the left side of the marker... I know it only needs one 4-40 and the one eye hole... but where does the 4-40 hole go?

It's simply has the one co-ordinate, need the other axis.

I could easily assume that it's mirrored, but that could be a costly assumption.

Anyone have some better directions?

EvilPopTart · 01-13-2006, 08:48 AM

outty, you're the man. Way to utilize the search button.