Evil Pimp Kit FAQ

bm4n · 11-21-2005, 11:50 PM

cool cool. i was also waondering (noob quesiotn) if there was an o-ring between the det and the gun wehre it scrwes in? cuz i jsut took mine apart and can't remember...thanks for dealing w/me.

pur3evil · 11-21-2005, 11:56 PM

Only O-ring between the Det and the Marker is the one you see in this pic - http://www.users.qwest.net/~neighbordave/old1.jpg

-Howard

bm4n · 11-22-2005, 12:03 AM

k, good, thanks.

man! mad props to the evil guys! i jsut asked about 40 questions in like an hour and you guys were all on it in like 5 mins! you guys rock! keep up the sweet work.

Bayne · 12-21-2005, 03:24 PM

umm
whats with the battery?
its inside my trigger frame..
do i have to completely take the frame off to rechange a freakin battery?

pur3evil · 12-21-2005, 03:35 PM

It's simple... and explained on the first page of this FAQ.

-EDIT- dang... didn't realize his pics are down... hang on...

Here's my version with new pics... Took a lot longer to edit and upload pics than anything.

Step one - Remove the two screws from left side grip panel (or remove grips completely).

Step two - Loosen asa / drop forward. If you're using the stock evil ASA / rail, you may have to remove the ASA to loosen the rail.

Step three - Remove the four screws from the left side panel.

Step four - Replace battery. Then reverse the above to reassemble marker.

Hope that helps.

-Howard

bm4n · 12-21-2005, 09:03 PM

one of my last step screws is weird...the allen wrench feelse like it is stripped almost (the allen wrench just slips around), but if you spin it the wrong direction it feels tight and doesnt slip at all...you htink i am hosed?

D.P.4life · 12-23-2005, 04:02 PM

You evil guys really do help a whole lot.

spaceman2141 · 12-29-2005, 02:45 PM

Pimp settings thread
http://www.pbnation.com/showthread.php?t=1335146

Zeoalex · 01-09-2006, 06:06 PM

is the bold on the newer pimps supposed to go back and forth w/o air? mine does and it makes me kinda nervous

EvilFingersPimpStyle · 01-09-2006, 06:21 PM

The bolt moves back and forth without air on most markers, so it's okay.

Zeoalex · 01-10-2006, 03:47 PM

ok, next question, when i air up my pimp, the bolt is too far back, keep reading...my bolt screw/pin whatever thing, is all the way in, the ball is still rolling back and getting out of the eye beam...what is happening?

the.evil.tech · 01-10-2006, 04:01 PM

sounds like the rear cap of your ram is coming loose and unscrewing on you.

Zeoalex · 01-10-2006, 04:11 PM

so.... i do what? I dont want to mess anything up...

spaceman2141 · 01-10-2006, 07:38 PM

make sure the cap is on all of the way. if it is still to far back. get some blue loctite (or atleast the one that can still be removed, i think it is blue), put the blue loctite on the rap cap screw, then screw that in until the bolt is where you need it. if you dont really want to mess with it, just got to a local field/shop and im sure they will do it for free or really cheap.

Zeoalex · 01-10-2006, 08:36 PM

ok, the thing is, i took off my ram cap and lubed it and put it back on TIGHT! i aired up my gun, and the bolt is mobing back and forth even with air, i think that the problem is that the bolt pin is not making contact (going into) the ram. It seems that when i take out the ram, on the end of the shaft there is that notch, i could be wrong but, i think that the bolt pin goes into that notch. help please? the problem being that the bolt pin is out of that notch.

spaceman2141 · 01-10-2006, 09:10 PM

with it aired up try to get the pin in, so you know where that the ram is where it is suppose to be. then if you get it in, and is too far back. then you get the loctite and do what i said

Zeoalex · 01-10-2006, 09:27 PM

yea, i fixed the problem with the ram, aired it up and the bolt is a little too far foward still, i have the ram screw all the way backed out and it hasnt moved at all. ill get some loctite, and btw i think its red 277 it says in teh manual. im gonna get some tomorrow and try it

spaceman2141 · 01-10-2006, 09:51 PM

after unscrewing ram screw, pull back on the bolt so it is as far as it can go back. then screw your ram screw in until the bolt is where you need it

Zeoalex · 01-11-2006, 03:41 PM

ah, it is now working, thx for the help

Sicarius (Banned) · 01-13-2006, 09:39 PM

My buddy bought a Pimp, and when his Det went to crap he put a CP on it, and when he first aired it up he said he heard a loud pop, but no air is leaking.

it's only been like this for a week or 3 at the most. Also, the LPR won't adjust to over 100. I've tried and tried to get it above, and the only time I was able to was when I took the CP set screw out and started to screw it back in.

any tips?

masspb · 01-13-2006, 10:25 PM

try upping the pressure in the cp reg. when i fist got my pimp in i had the same problem and couldnt get the lpr over 100.