[the loser]

on the title i think i spelt installation(sp?) wrong.....

anyways...

i haveing a frustrating time getting my board in. i can get the board in but it wont hit the switch. im about to lose my mind.

im thinking about taking it to my local pro shop to have them do it. how much do you think they will charge me? i was told if i get the right person, they will do it for free but if they do charge me, wats the most u think they can charge me?

[willthesoundman]

We had the same problem on our board. First make shure the board is in level and that you are not pinching any of the wires. If you tuck the wires in slowly around the capacitor it should slide right in. Now when you say it wont hit the switch do you mean with the frame on or off the gun. We had a similar problem but as soon as we mounted the frame back on the body it worked fine. There is a pressure issue. If you notice the resistor on the top of the board should be hitting your body when you install it. We had to trim that down to make it work.
The most important issu is the wires they tend to get caught up near the trigger and can cause it to not engage the switch. We are completing the installtion video as we speak. Hopefully this will help.

[tabradi0]

ah, that isnt that bad, that is easy to fix, i get mine to release the sear yet.

[the loser]

it wont hit the switch as in when i put the board in (all the way) it wont reach the switch. send me the video when ur done with it.

[willthesoundman]

with the frame on the body or off? If it still won't reach and you have it mounted on the body try bending the metal triigger on the switch down a little.

[Oracle (Banned)]

how do you take the stock board out anyway when i try i almost break the board

[the loser]

Originally Posted by willthesoundman

with the frame on the body or off? If it still won't reach and you have it mounted on the body try bending the metal triigger on the switch down a little.

off. im gonna try with it on next time i tinker with it. thx for the help.