[Hand Model]

Originally Posted by empire_049

yes i know that but i how come on the dm4, proto and 5's the e-tape works? but old the old school ones it wouldn't? it doesnt make much sences to me could someone clear this up for me? much thanks

What are you talking about?
He just says over a period of time it unravels itself. But the tubing doesn't.

[empire_049]

OH i didnt see the part where he says it comes undone my bad srry about that

[gremlin75]

Originally Posted by empire_049

ok any type of tubeing u would sugest to use? or anything sould work good?

I put what I used right in the post.....read it to find out what I suggest

Originally Posted by empire_049

gremlin75 u sure about the e-tape because i see on the protos and dm4,5 that they are using the e-tape? well i am going to give it a test when i get my matrix back from tmc and ill let u know if it holds up or plops off

Any tape will unravel over time. That period of time will chages depending on the tape, but the glue will break down and the tape will come off. Its just a given for any tape.

later
gremlin

[dyepb20]

This should be in the Uber sticky.

[Hand Model]

Originally Posted by dyepb20

This should be in the Uber sticky.

haha. we would need a mod around here for that.

[HPC]

make sure you rub down the tophat with alcohol first too. common sense i know,but the tape wont stand a chance if its adhered to lube.

[sailorslax88]

you need an 1/8 inch of electrical tape? does this have to cover the whole cyndrilical part of the top hat?

[nerosrevenge]

If I have a slam bolt should I bother with these mods??

[dyepb20]

If they arent already done with the kit, do them.

[gremlin75]

sailorslax88: Yes
nerosrevenge: No

later
gremlin

[nerosrevenge]

k Thanks!

[teamhavokcaptain (Banned)]

just get a lucky proto bolt at www.luckypaintball.com

[teamhavokcaptain (Banned)]

just get a lucky proto bolt at www.luckypaintball.com

[gremlin75]

Originally Posted by teamhavokcaptain

just get a lucky proto bolt at www.luckypaintball.com

You are a retard.....this is the matrix forum. A proto bolt will not work in a matrix

later
gremlin

[sirsaechao]

Yeah Evolve is the da **** but all and all IMO if you pay for a all day air then no need for it but it does add value to your marker

[InFaMoUsFaN]

Originally Posted by teamhavokcaptain

just get a lucky proto bolt at www.luckypaintball.com

lol.

[pinoy64]

need to try this mod on my gun

[spydersplatter]

there are 3 i suggest doing the first and the last, the second will help but you wont notice it as much as the first and the last one

[BallerT]

I just want to thank Gremlin75 for this info. I'm able to get 2 more pods easily with just the top hat and back plug mod my brother did for me with a dremal. Thanks Gremlin75.

Originally Posted by gremlin75

Ah hell Im bored already......

Top Hat mod
Get a length of rubber or vinyl tubing (5/8i.d.x 7/8o.d.), Stretch it over the stock top hat (this will take some work) then cut off the excess. This will make the stock top hat just 1/32 larger then the evolve top hat.



Bolt stop mod
For this you want to drill, dremal, or mill out the area between the stock bolt stop holes so that the end result looks like this



Back plug mod
Again you will want to drill, dremal, or mill/lath the stock back plug to look more like the c4 back plug. Increase the area around the plug and create 4 "air channels"



Disclaimer: I take no responsibility for any damage done to you, your bolt, or your gun by doing any of these modifications. This is a simple helpful guide for those who feel they are skilled enough to do these modifications on there own.

later
gremlin

[erollinc]

this really puts meaning to the name GHETTO BLASTER..... ima do this as soon as possible thnaks for the info

[tofumonkee]

how does this stack up against an evolve, id hate to pay 100 bucks for summat i can do with a dremel in the garage