Trigger job pics

bob123 · 12-11-2002, 04:40 PM

where could i get the tap thingy and a hex head screw and pipe tape(what is pipe tape, teflon tape)

captinjack123 · 12-12-2002, 09:02 PM

any one

bob123 · 12-14-2002, 04:50 PM

can any one tell me where to get the tap and stuff... anyone

kyargeau · 12-15-2002, 06:27 PM

You can get all of this stuff at any hardware store. The tap should be 3.00, the set screw should be less than .50, and the teflon tape is a buck. I did this trigger job to my EXT G2 and it works great. It'll be the best 4.50 you'll ever spend.

bob123 · 12-15-2002, 07:44 PM

thanks

moochems · 02-18-2003, 09:01 PM

im trading my cocker for a fish soon, and i saw this trigger mod thread and thought, yey fish owners are smart! but anyways, i had a shutter that had a trigger mod done to it, it wasnt shortened or anything but i think a kid put a clicky pen spring in the tigger return springs place, i could shoot that gun so fast, i once outshot a 12 volt rev, now i was gonna try this mod if i dont like the trigger pull stock, butt i was really wonderin how i could do what that kid did to my shutter. i didnt get to watch him do it, it was his gun at the time, can someone tell me how to do this to a pihrana trigger ,or tell me if it cant be done

thanks

darkstar (Banned) · 02-19-2003, 12:18 PM

Well I dont really know what the clicky pen spring did that the stock return spring dosent do?
If all its doing is returning the trigger to the foward position sooner than it is stronger, but this will make your trigger harder to pull!

If u had a pic of it that would help my right brain.

glad this is working for you all so well

moochems · 02-19-2003, 12:20 PM

it made it softer

scooter93292 · 02-28-2003, 05:39 PM

Darkstar, do you still have the pics available since they're non-viewable now? I was wanting to try the trigger job on my ext pro but I would like the pics for visual aids. Thanks.

darkstar (Banned) · 02-28-2003, 08:02 PM

You cant veiw them now... sucs. Ok e-mail me B/C this is not posting on my mail so I didnt even know u wrote me untill now. I will e-mail the pics to u... if I still have em?

Softer well try it you will not hurt anything if you try, just dont cut the original... just incase it dosent work! good luck

PS remember I did this mod without ever reading anything or even seening the spyders one, I just made it up. Just use your HORSE sense!

protsfreak · 03-02-2003, 07:12 AM

Hi, could darkstar or somebody else give me in depth steps on how to make my trigger pull shorter on my pro ts? Could you also give pics? i clicked on dark stars pics but they didnt work, thats why im asking. thanx

kyargeau · 03-08-2003, 11:15 AM

I posted a thread back on 10-30-2002 called "Trigger Jobs" that might help you out. You'll have to go back a few pages to find it. If you have any Q's I can try and help whrn I am able to get on a computer again. I am overseas as I have been called up with the reserves for a year. Good luck.

cockerfreak221 · 03-12-2003, 01:16 PM

I have a better way of doing it. Just pull your trigger as far back as it can, then glue a washer in front of the trigger. U should hear a click, when u release slowly. Thats all.

its so easy!!!

kyargeau · 03-13-2003, 12:24 PM

That is a wedge mod, which is a good idea. You can also use a piece of a credit card or something of similar thickness. However, it will not solve the majority of the long trigger pull. You could add a wedge mod to that spring compressing that protsfreak talked about in a different post and that might be nice. But it is still only going to take up the front slack, which is not that much on these Piranhas.

Aglar · 04-12-2003, 01:07 AM

Don't know about your frame, but every composite frame I've used has had just about 5 mm of front slack. I made up for it by glueing a small bead in front.

Rise · 04-12-2003, 06:15 PM

there is approx. 4mm or so of back slack too.

Aglar · 04-12-2003, 10:37 PM

Mmmhmm. I put one behind it to help make up for that today

NoSkilLWilL242 · 04-22-2003, 05:30 PM

Im interested in doing this mod for my gun and all but im unsure with what to do in step 3.

Umm i was wondering in which direction u put in the hex screw. Yea i kno makes me sound retarded but better ask u and feel dumb in stead of messin my gun up. And if u would rather email me or IM me thatd b good 2.

Rule336ja84@yahoo.com

AIM ScreenNAme: NoSkilLWilL242

NoSkilLWilL242 · 04-22-2003, 05:31 PM

i meant as in if u screw the hex screw in by the way u drilled the pilot hole or up from the trigger gaurd.

kyargeau · 05-06-2003, 12:53 PM

You want to screw it in from the bottom so you can adjust it with the trigger frame mounted on the gun.

darkstar (Banned) · 05-31-2003, 04:05 AM

Yes thats right...
sorry scooter I dont have the pics anymore. But they are back up here!!!
I just got back from Panama City were my brother and I played out at panhandel it was pretty nice you all should check it out on your vacation (if you go there)