LED Discussion/Information

paintballer50505 · 10-30-2004, 06:01 PM

scratch that 70 dollar number i just looked its 180 u can buy an led for that price

paintballer50505 · 10-30-2004, 06:23 PM

that piece of metal that holds the 14 way in does it do anything other than act as a mount for the 14 way valve? and do u think u can drill through it?

izahuh · 10-30-2004, 10:38 PM

NO you can not drill the housing for the solenoid

stupidity · 11-29-2004, 02:05 PM

i have a dark LED angel, i just got it from a friend, and it dosnt seem to be charging...does the gun have to be on or off when charging?

paintballer50505 · 11-29-2004, 03:27 PM

izahuh · 11-29-2004, 03:28 PM

Respeck-Knuckelz · 12-24-2004, 08:03 AM

my LED rocked

I miss it

the_kwa · 03-23-2005, 08:19 PM

Need help fixing your harness?

diagram from;
ken crane
www.performanceangel.com

NightKreeper · 06-01-2005, 10:02 PM

Gettin a 99 ECLIPSE ANGEL LED in a week or so, have some questions...

1. What pressure should the HPR and LPR be at?

2. What parts need to be greased and what parts need to be oiled?

3. How long should I leave it charging for a full charge, and how often should I charge it?

izahuh · 06-01-2005, 10:35 PM

1...the hpr should be in the 4's I believe....lol its been a long time, and if you have a mini reg then you can't guage it, basically shut off then slowly bring it up to where it shoots a ball then chrono....the lpr should be around 90, which you never have to mess with...

2. I woudn't grease anything really....few drops in the asa before airing it up and dry firing should be good enough...

3. since batteries only have a 4 year shelf life it would be a good idea to replace the ones you are getting , unless they are not the original ones, LED will flash green and red when the batteries get low but overnight should be enough....

Eclipse This · 06-02-2005, 11:45 AM

i charge my eclipse between 8-10 hours for a complete charge.

pop the battery out when you get it and put it in the freezer. that resets the memory. directly after charge it for about 14 hours. that's the suggested time from WDP for a full charge.

and the Eclipse's were meant to run at 425 hp i do believe.

NightKreeper · 06-02-2005, 02:51 PM

Quote:

Originally posted by izahuh
3. since batteries only have a 4 year shelf life it would be a good idea to replace the ones you are getting , unless they are not the original ones, LED will flash green and red when the batteries get low but overnight should be enough....

Actually, the guy I'm buying it from put a new battery in it last Summer.

NightKreeper · 06-02-2005, 02:52 PM

Quote:

Originally posted by Eclipse This
pop the battery out when you get it and put it in the freezer. that resets the memory.

...are you sure? I'm not saying you're wrong I've just never heard of anything like that before. How long should I leave it in the freezer?

izahuh · 06-02-2005, 04:33 PM

if its a newer battery then dont' worry about freezing....just charge it only when the LED start to flash red and green and you should be fine.....

Eclipse This · 06-06-2005, 11:48 AM

yeah if it's new don't worry with it.

if it's an original you just put it in over night. works with everything from cell phones to rc cars.

NightKreeper · 06-06-2005, 12:20 PM

^^I never knew that.

What size mm allen wrench do I use to remove the ball detent? I think it's 3.5 because my 3mm is I THINK to small and my 4mm was too big.

Also, how do I charge the gun? I read the manual on AOG, but I want a more simple, clear explanation. I believe it's dead because the LED slowly blinks green, and when I pull the trigger ir blinks red/green.

[Edit:] OK, the gun has been charging for 3-4 hours now. When I plug it in, the red light on the charger is dim, but when I mess with the wire a bit it turns bright red (which is supposed to mean rapid charging). The green light on the charger came on for a while, but now it's bright red again. What does this mean?

Also, what is "battery conditioning" (when the red light on the charger is flashing).

Eclipse This · 06-08-2005, 04:14 PM

the slow green blinking on your gun is telling you the gun is almost dead.

the red/green flash happens when you pull the trigger to tell you the noid is working i believe. so that should always blink when you fire it.

as for the charger i thought the red was rapid charge and the green was trickle charge (for when it's close to full) anybody know otherwise?

NightKreeper · 06-08-2005, 04:28 PM

Just posted a pic of my LED in the pic-thread sticky on the 1st page. Check it out and let me know what you think!

Scootscr15 · 06-12-2005, 07:33 PM

i need a charger for my LED< and id like to get a Zip chip, or any other ramp/FA chip any info ?>

NightKreeper · 06-12-2005, 07:37 PM

^^Check www.buypb.com they have both.

Scootscr15 · 06-12-2005, 07:46 PM

i was thinking of buying a used charger for dirt cheap and seeing anyone could just flash a chip for me ? or if anyone wants to part out one.... buying new is too much when ive got PBn here