Official ACE Info Thread

smasher41 · 01-30-2005, 10:12 PM

the_kwa,

congrats on the nice install so far, one qestion, did you just push the wires into the 14 way's connector? LOL.

The only gripe i have on the morlock boards is the on board LED, otherwise they are very kick *** little boards.

the_kwa · 01-31-2005, 07:24 AM

Quote:

Originally posted by smasher41
did you just push the wires into the 14 way's connector? LOL.

Haha! Yeah, I did just push them in for now, i'm still tring to find a quick disconect for a reasonable price...

These are what i've found so far...

MindJob · 01-31-2005, 10:30 AM

NICE

I have my LED body on its way back from TAG from drilling it for the eyes and removing a stripped breech rod.

How did you mount the board inside the grip? is there a screw?

the_kwa · 01-31-2005, 11:06 AM

Quote:

Originally posted by MindJob
How did you mount the board inside the grip? is there a screw?

no screw, the foam and bat. are holding it in place just fine...

smasher41 · 01-31-2005, 01:54 PM

hmm inline quick disconnects to fit the stock angel connectors.... hmmmmm

like these?

Winnebago · 01-31-2005, 03:40 PM

purty!

the_kwa · 01-31-2005, 09:38 PM

Quote:

Originally posted by smasher41
hmm inline quick disconnects to fit the stock angel connectors.... hmmmmm

Where can i get some and how much?

the_kwa · 02-01-2005, 10:32 PM

there's some pictures of the finished product....

smasher41 · 02-01-2005, 10:42 PM

i tried to hit you up on aim about the conectors, but u werent online.

end up finding them or ripping them off a stock board?

the_kwa · 02-01-2005, 10:46 PM

i took the hopper intelli feed conector off my LCD board, that way if i ever need the board again, i'll still work

smasher41 · 02-01-2005, 10:50 PM

heh, i had a few donor Speed boards laying around, after some research, i found em muahahahha! i'd get the crimpers for connectors like the noid has, but i dont think i want to drop $450 on them just yet.

btw, did you go the 66mm back or did you go a bit farther to get the eye elements under the eye cover on the ball detent side?

ProBaller1102 · 02-01-2005, 11:22 PM

that is a tight gun i got to get me one of them

the_kwa · 02-02-2005, 09:46 AM

Quote:

Originally posted by smasher41
btw, did you go the 66mm back or did you go a bit farther to get the eye elements under the eye cover on the ball detent side?

i'm about 67mm back, but I turned my ball detent down on a lathe today and it fits like butter now

ProBaller1102 - maybe someday i'll let you shoot it

smasher41 · 02-02-2005, 10:38 AM

lathe, im jealous! i have to get others to make me new toys with lathes

all i can say is 6 and 10 gram hammers are very cool to have in a fly

i had to give aobut an extra mm on my ironman also cause of the ball detent, ordered a cobra indestruct while im at it, they have cut down sides( flats for a wrench) which should help give the eye cover some more room.

the_kwa · 02-02-2005, 11:19 AM

i'm a machining student in college, so have a BUNCH of machines at my disposal...

i'll take a pic of the shop tomorrow if i remeber

smasher41 · 02-02-2005, 06:26 PM

Hmm, i think i may have found what i want to do in college now. muahhahahah!

do you have cnc mills by chance?

the_kwa · 02-08-2005, 09:01 AM

My Angel

there's the vid..

o2cocker · 02-08-2005, 01:47 PM

awww the poor doggys

the_kwa · 12-22-2006, 07:07 PM

Tyler Humphrey's old Flipmode LED..
Kapp LCD Frame
Kapp ASA
LCD Valve
Shocktech LPR
Shocktech HPR
Lucky LCD Board w/******
Lucky Laser Eye's (white)
Eclipse Eye Covers
CCM Mid Rise
Dye Ultralite