Viewloader VLocityI've gone through about 3 VLocity's.
Same story, always fed fast, pretty reliable, but i would get maybe a half-dozen uses out of each one before the motor or gears wore out and would stop feeding...
I've gone through about 3 VLocity's.
Same story, always fed fast, pretty reliable, but i would get maybe a half-dozen uses out of each one before the motor or gears wore out and would stop feeding paint.
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityOk so i have a dynasty upgrade in this loader and it loads pretty fast. the only problems iv had with it was when i broke paint in the gun and it splatter upwards into the hopper...so i cleaned the...
Ok so i have a dynasty upgrade in this loader and it loads pretty fast. the only problems iv had with it was when i broke paint in the gun and it splatter upwards into the hopper...so i cleaned the inside of the hopper...but when i went to play it would make a different sound then usual and it would just stop loading randomly. i had to take it apart to the very last piece, and found paint jammed under the part where it make everything spin...which slowed it down and made it "jam"...after that, it worked great once again...i highly recommend this hopper if you getting into tournament and want a cheap but good hopper. but if you do get this hopper GET THE DYNASTY UPGRADE FOR IT...it includes a chip that saves 30% battery and instead of 3 loading prongs it has 5 shaped like a ninja star. loads amazing and i love this hopper..the last con would be the shell break easily, and the screws have to go in JUST RIGHT...i tried putting the screw in for the battery door but it wouldn't go in, cause the threads were messed up and cracked...i use electrical tape or duct tape on it now...still works fine...=D
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityThis was a fast, cheap loader that was perfect stock. You could upgrade the board if you wanted, but really wasn't necessary. They are very light and never had issues with the feedneck snapping, as...
This was a fast, cheap loader that was perfect stock. You could upgrade the board if you wanted, but really wasn't necessary. They are very light and never had issues with the feedneck snapping, as long as you shaved it down before use.
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityThis loader is by far the best. I have used it since it came out in 2007 and have loved it every since then. RECOMMEND.
great backup for my rotor and for friends. is reliable and always gets the job done
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityMy Vlocity has always been a decent hopper. Stock, the hopper sits a little tall so most people trim down the feedneck. I have had issues with inconsistent feeding and the force options, although...
My Vlocity has always been a decent hopper. Stock, the hopper sits a little tall so most people trim down the feedneck. I have had issues with inconsistent feeding and the force options, although giving faster feeding options, are annoying due to the sound produced while using those tension modes. Not a bad hopper but it does have a few issues that could be resolved.
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityExpect to pay a lot of money for batteries if you are using a vlocity. Batteries never seemed to last more than a couple of days at most.
Although it was extremely light, it was also an easy target...
Expect to pay a lot of money for batteries if you are using a vlocity. Batteries never seemed to last more than a couple of days at most.
Although it was extremely light, it was also an easy target because of it's height. This could be fixed by cutting down the feedneck.
Overall, a decent hopper, but there are much better out there nowadays.
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityOverall, I've been very happy with my Vlocity. To stop the buzzing noise, I put it in setting 1 and now it's quiet and still feeds reliably. It's fairly simple to take apart, and replacing the shells...
Overall, I've been very happy with my Vlocity. To stop the buzzing noise, I put it in setting 1 and now it's quiet and still feeds reliably. It's fairly simple to take apart, and replacing the shells is kind of fun.
My main concern is how tall it is. I may trim down the feedneck (which won't hurt anything,) because it's quite long. It also has a unique lid, that means regular halo-style speedfeeds won't fit without an adapter.
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityNever had a problem with this hopper can relay on it
Never had a problem with this hopper can relay on it
This review has been rated:
Currently 0/5 stars.
Viewloader VLocityto start out this is a great loader itsfast and light, much lighter than a halo. the lid is nice and big so its easy to reload i like how easy it is to turn on but it kinda esy to turn back off when...
to start out this is a great loader itsfast and light, much lighter than a halo. the lid is nice and big so its easy to reload i like how easy it is to turn on but it kinda esy to turn back off when your switching hands and moving around the battery life is ok but not as good as the halo but i usaully change out all the batteries on anything i use nearly everytime i go play so it dont really matter. oh ya and one thing i cant figure out what the lil black button next to the on/off switch is for i bought it used so it didnt come with a manual so if you know what its for let me know
