New to BKO's(Let alone bushys)

[DragunflyGuy]

I just bought a BKO and I was curious if there is anything I need to know, do's and dont's, stuff like that :)

[Ny.sky]

get a halo B, or an Empire Reloader B. if u get anything other than those 2 hoppers... you will chop like a mofo. unless u get that blind bolt.


lol... we have the same avatar. only i like smart parts.

[Viper588]

dont use oil on ur gun use like dow 33 or somthin like that

[enjoidvssk8er]

don't lube bolt, not needed. hpr 250-275, lpr for fps

[veedoubleugee]

i guess i think different from the last 3 posters.

Originally posted by Ny.sky
get a halo B, or an Empire Reloader B. if u get anything other than those 2 hoppers... you will chop like a mofo. unless u get that blind bolt.

i use an eggy w/ z board and it works fine. blind bolts can cause your gun to shoot up into your hopper. also the tips have been known to fall off.

dont use oil on ur gun use like dow 33 or somthin like that

i use akalmp extreme lube with no problems what so ever. alot of people use oil.

don't lube bolt, not needed. hpr 250-275, lpr for fps

if you use the right lube you stock bolt shouldnt swell. mine didnt when i had my gun stock. try 200-250 for you hp reg. 275 is a little on the high side.

[El Paintballer]

I use a regular Empire loader, the cheaper one, and it doesn't chop, I've never had a problem. One thing, I found out the hard way, lol, don't take the reg apart then put it back together wrong. Cost me 60 bucks.....

[M. Clementi]

be VERY careful when you take the tray off from the body. When I first got my gun my friend took the tray off quickly and the wired came apart and they kept on falling off when I tried to solder them back on and I ended up needing a new wiring harness.

[DragunflyGuy]

lol, shoulda smacked your friend.

[M. Clementi]

yeah but me were both idiots at the time. I had no idea it could have been the wires and for some reason Iautomatically assumed the solinoid was fryed until his brother saw the loose wires lol

[veedoubleugee]

dont drop your gun...lol

[JoePsycho]

HALO B, don't lube the bolt, don't take it apart unless you know what you are doing, do the detent eraser mod, N2, don't be retarded...lol.

[chewyorphan]

Originally posted by veedoubleugee
dont drop your gun...lol

:tup:

[ang.1]

dont set your hpr to 700...

[italianmobsta74]

Originally posted by M. Clementi
be VERY careful when you take the tray off from the body. When I first got my gun my friend took the tray off quickly and the wired came apart and they kept on falling off when I tried to solder them back on and I ended up needing a new wiring harness.
same exact thing happened to me
get a halo b or reloader b!! eggs have problems with blowback markers like the bko

[DragunflyGuy]

Ill try my eggy and see what happens. Anything else?

[paintballa8224]

i can easily outshoot my eggggg get a halo unless you have eyes. Careful pulling it apart. Id suggest QDs on the noid wires and if you have eyes...either that BE CAREFUL. Dont take the solenoid apart unless you know what youre doing...learn from my mistakes. other than that its pretty simple to tear down and maintain.

[DragunflyGuy]

It just arrived today and it has eyes. I wasent sure before, wasent mentioned. Im not taking a screw off without someone else there to give me a hand lol

Didnt have a drop.. Shoulda seen that coming.. Now I gotta rush to get one by saturday..........

[veedoubleugee]

i have one on ebay that should end soon. its an dop asa with 3 different size drops auction # 7141509245. i also have a check it uinmount auction # 7141509309. they are both at like $10 right now.

[Sugart]

Are u sure it has eyes, seems like that is something I would mention when selling. The MI BKO's has dual detents, how big are the eye covers, or better yet pics. I could tell you right away if it has eyes.

[DragunflyGuy]

Anything else?

[dustinw]

use a halo b, get a vapor bolt or some bolt with o-rings to eliminate blow back, get the SP mod done to your RAM, and buy a ram gauge for it, get the aka scm2, get a new hpr, get the vapor valve, a dye ul, and a ccm low/no-rise. one awesomated gat!

[veedoubleugee]

Originally posted by dustinw
use a halo b, get a vapor bolt or some bolt with o-rings to eliminate blow back, get the SP mod done to your RAM, and buy a ram gauge for it, get the aka scm2, get a new hpr, get the vapor valve, a dye ul, and a ccm low/no-rise. one awesomated gat!

you cant use a ram gauge on the bko.....

[DragunflyGuy]

I put my nitro tank in today, I plan on paintballin tomorrow and im not gettin any flow! the valve on my BKO is just flat below 0, when I turn my drop on, nothing.. wtf is wrongggg!?!?!?

[veedoubleugee]

if you have a murder inc bko then your probably s*** out of luck. the ones on mine were both bad.

[paintballa8224]

Dragunfly play arougn with your HPR and LPR. um...make sure your noid works. IF YOUR NOID DOES NOT CLICK THEN IT WILL NOT SHOOT! if you have eyes, make sure they are OFF if NOT useing paint...it wont shoot if eyes on and no paint!!!!!

[italianmobsta74]

Originally posted by paintballa8224
Dragunfly play arougn with your HPR and LPR. um...make sure your noid works. IF YOUR NOID DOES NOT CLICK THEN IT WILL NOT SHOOT! if you have eyes, make sure they are OFF if NOT useing paint...it wont shoot if eyes on and no paint!!!!!
thanks for clearing up the question of the century

[DragunflyGuy]

Should it shoot anyways with the eyes on and the paintball in there? I mean, wouldnt the bolt?

[DragunflyGuy]

?

[paintballa8224]

eyes on and paint YES!! eyes on, NO PAINT then NO! Make sure air is going through your HPR....look at the guage. Make sure the noid works. If it doesnt then you have a opening in circuit (make sure all the wires are plugged into the wiring harness) or you might have a bad battery. IF the noid works and air is going through HPR check the valve and stuff. MAKE SURE THE BOLT IS NOT UPSIDE DOWN! the hole has to be on the BOTTOM when you put it in.