BKO and em1 compatibility?

[StoopheadFred]

Hey guys!

Yesterday I got my em1 in the mail, and by looking at pictures and specs of the two guns it looks like the Em1 and the BKO would have a ton of interchangeable parts, but that could just be me. The thing I really need to know about is the vertical adapters for BKO's, because I want to run a volumizer and a micro rock, but I kind of dont want to tap the stock LPR. So, will a vertical adapter like the 15* one from www.zenitram-mfg.com work? Also it would be great if you could tell me any other interchangeable parts for my gun that I would be interested in, because I plan on making this gun a huge project. Heres a list of things I plan on doing to the gun:

1) Custom board replacement (timmy, dm4, something like that)
2) Air returned ram using dm4 or timmy noid
3) Custom ram (delrin.. something like that)
4) Eyes
5) The lpr / VA thing
6) Barrel and reg (already have freak and a cp reg)
7) Angel or other type of frame
8) Unimount
9) Grips / aesthetic stuff (LED's.. ect.)

So, what do you guys think? I have a feeling that for the price I picked this gun up for (85 bucks!) it will be an awsome project.

[Viper588]

for the air returned ram shootpaint has made one for the bko so u dont need to use another guns unless u want to

[Emenresu]

I would doubt that many parts would be interchangible because they are made by 2 different companies.

[enjoidvssk8er]

Originally posted by StoopheadFred
Hey guys!

Yesterday I got my em1 in the mail, and by looking at pictures and specs of the two guns it looks like the Em1 and the BKO would have a ton of interchangeable parts, but that could just be me. The thing I really need to know about is the vertical adapters for BKO's, because I want to run a volumizer and a micro rock, but I kind of dont want to tap the stock LPR. So, will a vertical adapter like the 15* one from www.zenitram-mfg.com work? Also it would be great if you could tell me any other interchangeable parts for my gun that I would be interested in, because I plan on making this gun a huge project. Heres a list of things I plan on doing to the gun:

1) Custom board replacement (timmy, dm4, something like that) Emmys came in 2 boards/chips red and blue, red being more rare and 18bps (i think) blue was 12

2) Air returned ram using dm4 or timmy noid
I don't think that would work because it is spring returned (spring on the back of the bolt and not built in like on bkos
3) Custom ram (delrin.. something like that)
not sure about this one
4) Eyes
if you find an eye compatiable board..
5) The lpr / VA thing
any bushy one should work
6) Barrel and reg (already have freak and a cp reg)
7) Angel or other type of frame
angel one would be the easest but not without uber dremils skills
8) Unimount
should be spyder hole patern i think
9) Grips / aesthetic stuff (LED's.. ect.)
http://www.kingman.com/ubbthreads/postlist.php?Cat=&Board=UBB8 has alot of good things

So, what do you guys think? I have a feeling that for the price I picked this gun up for (85 bucks!) it will be an awsome project.

nice price for a potentailly good gun

[allroz42]

Originally posted by StoopheadFred

1) Custom board replacement (timmy, dm4, something like that)
why would you want to pay a lot more money for a board that is just as good as the chaos. also, you'd need to rewire quite a bit of stuff.
2) Air returned ram using dm4 or timmy noid
the air returned ram has already been done, look for a kit from www.shootpaint.com pretty soon
3) Custom ram (delrin.. something like that)
if it was made completely out of delrin, it may not withstand the use.
4) Eyes
otherwise known as pds
5) The lpr / VA thing
like you said from zenitram or you can drill and tap your existing asa for it
6) Barrel and reg (already have freak and a cp reg)
not too bad
7) Angel or other type of frame
been done as well with the angel frame. good luck.
8) Unimount
yup
9) Grips / aesthetic stuff (LED's.. ect.)
kja;skaj;fdlasjdf
So, what do you guys think? I have a feeling that for the price I picked this gun up for (85 bucks!) it will be an awsome project.

answers are in red. as far as the em-1 parts and bko parts being compatible, no. kingman and icd parts can't interchange.

[im a drunk]

there a asa for em1s on some site no lpr thing either

go to kingman forums ask for site then compare the asas

now i almost 98% sure they wont interchange