Problem- Need Help

[pbkid39]

First Post! Yay

Ok, well I air up my b2k with both the lpr and hpr all the way down. Next, when I go to turn up my hpr the bolt automatically cocks back and anywhere's over 180psi it leaks from what sounds like the noid. When I go to shoot, I can only take one good shot and then the rest just stutter because my gauge is recharging VERY slowly. I figured that my lpr may be the problem so I replaced it with a sonic lpr but I'm still getting the same problems. Now, I'm thinking this is definetly either my noid is messed up or my tank is not out-putting enough pressure. Any idea on how I could fix this?

Video:http://www.pbvidsupload.com/upload/bushy.avi

In the video, I had barely any air left in my tank. Even when I have about 1000-2000 psi left it does basically the same thing. When I turn my lpr in or out, it doesn't change the leak in the noid or the way my bolt cocks back. Even with my lpr turned up about as high as it can go, the bolt still doesn't recock all the way and the recharge is slow.

May send it away to Nynexx (ICD tech in Canada) but I just want to make sure that it's not just a simple fix.

[Harbinger[TG]]

try a new battery yet?

[pbkid39]

Yea, but it's a very cheap kind. I'll try a better battery.

[Harbinger[TG]]

i always use 99cent bats, no issues
try this
lower hpr
raise lpr
raise hpr

see what happens

dont raise them alot

[pbkid39]

I'll try that, doubt it would work.
Need more help before I decide to send it away. :(

[acidrain]

Sounds like you have your adjustments backwards on the LPR (turned all the way up, not all the way down) or you LPR is stuck on (piston has stuck open, or you are missing parts).
Remember, some LPR's go up when you unscrew them... AKA's for one. If you are sure you are turning it the right way...
Disassemble and clean the LPR. Make sure evrything is there, in the right order, and working correctly.