Icon LED ups

[nypainter]

Hey guys I am still kinda new to paintballin I have a bunch of newbie markers but I am trying to build up a Icon LED and wanted to know if I need a regulator on it if I am using HPA ?
And if any one know any reasons why it would be killing batteries fast?
If there is any other suggestions I would like to hear them too.

[P4in7B4113r]

hey yea youll need a reg get a cp they work good and look hot.
My icon also eats batteries like a mofo
and are you trying to pimp your gun out?

[nypainter]

well not really pimp it out but make it affective. It is killin batteries like evey hopper full I dont think it would be so bad if it were like one a week but not every hopper. I am gunna sell alot of my other paint ball stuff to get better hopper and stuff.

[P4in7B4113r]

ok what batteries are you using and if you want to role bi**hs than get a t-board.

[nypainter]

I was useing duracells but it is at the pro shop at the paint field being checked out for drains. and what is a T board? is it for the grip or loader?

[P4in7B4113r]

the t- board is a eletronic board that will go into your grip frame the green thing you see in there. With the stock board you can only shoot up to like 13bps(balls per second) and with the stock micro switch the thing you push to shoot the gun is a 250g switch and you probly will only be able to hit like 10bps. With the t-board( comes with a 50g switch much lighter so will be able to shoot faster) you can hit 36bps( your gun wont be able to cycle that fast) and you will be able to change the debounce and eye delay, it also comes with eyes so you wont chop. It will make your gun as fast as a timmy, but if you have the stock bolt your gun will not be able to cycle as fast you may be shooting so i would suggest getting a new bolt if you get the board.

[P4in7B4113r]

you can get the board at http://www.scenariodreams.com/t-board.htm

and the bolt at
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=A8dEzkHyMSFEdQAwPeSEZks7fQ-4OtrwbVQ=?ProductID=4ymsFAY7YaMAAAD4Pe3ju4A1

[nypainter]

Thanks dude I will look onto the T board and bolt!!!!!!!!!!!!

[P4in7B4113r]

no probe
and you could also get a titanium hammer to increase you cycles even more.

[toolshed rec-face]

You don't need a reg to use HPA. Any preset high pressure screw-in such as Crossfire will work fine.

[Piantballpsycho522]

where can u but the T-board

[nypainter]

the T board replaces the green electronic board that controlls the functions