Fastest Rebel ever

[Ploop A Gigga G]

DID SOME CUSTOMIZATIONS TO MY REBEL AND NOW IT GOES BETWEEN 20-27 BPS ON CHRONO N E ONE WANNA POST HIGHER BPS WITH THEIR REBEL?

[AirSin2000]

Please do not type in all caps. What type of board you have on it?

[Ploop A Gigga G]

idk but i did alot of customizations w/ it cuz is used to be my x-gf's

[P4in7B4113r]

put a pic on.

[Ploop A Gigga G]

will do when i have the chance

[StealthRT]

Soooo lame dude....not even funny....

What valve is in it? What pressure you running? What loader? Don't even know what board is in it? Well can't be the stock board for sure...., what reg, what trigger switch, what bolt, striker, mods? What pressure you runnin at?

[P4in7B4113r]

yea dude you need to find out what u got in that gun

[Ploop A Gigga G]

a regular rebel valve customized, sorry dont know the pressure, reloader b, no im not sure what board cuz i have like 6 boards and the one in it has like no printing or #s on it and it looks different then all the other boards, angel mini reg, im not sure which trigger switch it looks like stock but doubt it, custom delrin bolt, stock striker, mods like changing the valve, making the trigger frame adjustable, changing the trigger spring, and thats it really and again im not sure the pressure is runnin i feel like just leavin it as is

[StealthRT]

Your so full of bull****...maybe it you got an x-valve from a mag that would be about all that could keep up with that kinda speed...definatly not a modded stock valve...

An angel mini reg will not keep up either...no could your fingers hit anything higher then 20bps...its impossible...fastest ever pulled was 22bps, and he sure as hell wasn't shooting a spyder...nor could a reloader B keep up a consistant 22 balls per second....so full of ****...

[P4in7B4113r]

stealth ppl have shoot over 22bps before.

[AirSin2000]

No^^ that is incorrect. The Reloader B can easily feed 22 bps consistently. If I remember correctly, Draguns are based off spyders, and blowbacks are the fastest cycling markers on the market.

[Ploop A Gigga G]

yeah ill get a vid site up soon so you guys can witness this non-bull**it fer urselfs

[StealthRT]

Fastest CYCLYING makers YES! Huge difference between cycle and shooting paint...

No one has pulled faster then 22bps without bounce...and even the sweetest valves on the market cannot keep up with the air flow needs past 24 or so bps, but common, a modded stock valve?!?!

A reloader B and 22bps will result in chops, personally tried and tested...

My Dragun is not a blow back...its an air ram...no idea where that came into play however...

The blowback up your feedneck is going to destroy your ROF, even with a force feed loader, that kind of rates of fire he's claiming, blow back will be an issue...

With a stock switch, you can absolutly not reach those kind of rates without full auto..

You can't even tell us what board is in the gun, how is anyone supposed to belive the rest of that crap...

I guess you could get by on a technicallity...you could actually be getting the marker to cycle at your claimed speeds, however it will be quiet a large blender, your consistancy would be horrible, and the recoil of the gun all together will make this kind of ROF completely useless for all practical reasons...

IF you want to get into it, I have an old brass eagle avenger, all 100% stock with the frame modded so the sear stays down as long as I hold the trigger down, and it will lay down over 40 bps with my qloader....consistancy sucks, accuracy sucks, it chops a bit, if the tank starts getting low it won't have the power to recock the hammer, and above all is field illegal...but hey, its a fast waste of paint...

[Ploop A Gigga G]

well your right after the first chop it is a blender, it does have bounce and that is why it can reach the bps speeds, but trust me just wait and c when i get the vid up

[PhatBoy00]

stealth man stop flaming and let this guy have his thred about his stuff if you dont agree with what hes sayin then get out of his thred and leave him alone

[StealthRT]

Originally posted by PhatBoy00
stealth man stop flaming and let this guy have his thred about his stuff if you dont agree with what hes sayin then get out of his thred and leave him alone

Its a public forum...this is what its for...I however don't see you contributing to the discussion, so why don't you get lost?

You switch is likey not stock if you are getting enough bounce to reach 27bps...ya know, 20bps I'd bellieve, while still a blender, 20bps would be achieveable, and with the right loader and good valve, it would be easily attainable, and legal, for the fied...The kick of a blowback gun at those ROF's must be insane and likely kill your accuracy, but I guess thats not what your going for...

Like I said, with the exception of the mags X-valve, the best valves on the market can only keep up enough airflow for about 24bps, and thats providing the rest of the setup is extreamly free flowing....In your case, the stock striker, valve, and definatly that crappy angel reg, are your bottle necks...Put a sweet reg, Tornado valve, and mod your stiker, and about 24bps will be useable in a game for you...

Your reading of 27bps cannot be accurate, as you said yourself you were using a reloader B, which can only feed a consistant 20 or so bps...yes, it can have short bursts up to 40bps or so, but they only last for 2-3 balls, and thats not long enough to register accuratly on a BPS chrono...which are not 100% accurate in the first place either...Only way you could hope to hit those kind of ROF's, is a Halo B with V35 board, or a Qloader...like I said, Qloader will feed my Brass eagle toy at around 40bps with hardly any chops...

[P4in7B4113r]

hey stealth how well does that asa work on your dragun

[StealthRT]

I PM'ed you about it, don't want to get this thread off track...

[Angel_Kid2067]

...i bet u cant pull that fast though...i would like to see a video..

[P4in7B4113r]

Yea hury up and put a vid on so this will finally end

[meet_the_focker]

ploop, ur makin up ****, u were listing the stuff on it and dont know half of the parts on it, if u made it u should know what switch u have on it, altho a rebel wont go that fast

[YoungGuNNer]

i have a reloader b on my Icon LED and it cant keep up with my fingers i shoot air more then i do paint

[StealthRT]

Still waiting on that video pal...

[neo71665]

Originally posted by StealthRT
Still waiting on that video pal...


like its gonna happen

[bigceelo]

were waiting.....wheres the pics and vids!!!!

[Carapace]

Originally posted by StealthRT
No one has pulled faster then 22bps without bounce

..... You're joking, right?


ROFL!!! I can pull 22bps on my angel without bounce, and thats when i'm straining, theres a guy on the local pb team around me who can pull 26 w/o bounce, and THATS the fastest i've ever seen...

[StealthRT]

Originally posted by Carapace
..... You're joking, right?


ROFL!!! I can pull 22bps on my angel without bounce, and thats when i'm straining, theres a guy on the local pb team around me who can pull 26 w/o bounce, and THATS the fastest i've ever seen...

Right man...sure you can...keep telling yourself that...I recently saw the o5 speed at 25bps, but that however was with bounce...

[Carapace]

Don't hate because the ladies think your trigger fingers slower than mine :)

Last time i checked, i could read, and i read 26bps rof on his a4's lcd...

[StealthRT]

LOL Oh my...you can absolutly not trust what your LCD screen on a gun tells you. It measures the ROF between as little as 3 balls...thats not at all acurate...the only 100% acurate way to determine ROF is to make a sound clip of you shooting your gun and check it with goldwave or similar product...

[Carapace]

it's proof enough for me... aesthetically anyway...

[qhimq]

not all blowbacks shoot air up feedneck. I saw someone with a dragon make it have suction that would do some awsome stuff for your ROF.

http://www.pbreview.com/forums/showthread.php?threadid=251652&perpage=20&highlight=suction&pagenumber=1

[bobsean]

So, how did you modify the valve man? Sounds iteresting. Also what model of the rebel did you do this to? thx