ICON E sweet spot trigger NEED HELP

[spyvspyder]

I am getting very frustrated with putting in my new checkit sweetspot trigger. i try to take out that ping that holds the trigger in place but it wont come out. i use a hammer and allen wrench to pound it but it isn't budging. once i find my digital camera im going to take a picture and show you. Please help this is making me insane.

i need that pin out so i can put my trigger in, please help.

[P4in7B4113r]

ok the pin has small ridges on side of it. You have to hit the pin on the opposste side of the end with the ridges. Its easier to take the pin out with something like a small srewdriver.

[spyvspyder]

I know, im using a hammer and a small allen wrench to try to pound it out. but its not budging. any other ideas? like does the trigger have to be in some potition?

[dubis07]

Make sure you are have it on the right side, as said above. Do not use an allen wrench, get a nail. Hit ont he side without the ridges. It might help to take off your frame and have someting hold it in place. You must POUND IT VERY HARD, first time getting these out is always very stubborn. Do not be afraid to whack it.

[spyvspyder]

http://img122.exs.cx/img122/5143/fa-image003.jpg

i did it. me and my friend had to pound it out. after we got it out we had to sand the inside of the sweetspot trigger because the stock trigger pin was too big for it. after about 20 minutes we had it in. thanks for the help people.

Ben

[P4in7B4113r]

HOW well does the trigger work or is it nice im thinking of getting one

[MISFITofMAGIC]

i just ordered one tell me how it is i hope i didnt waist my money!

[PhatBoy00]

they are prety good but if you go to the spyder threds you can find some better 3 pt ajustable ones

[spyvspyder]

the trigger is great, i love it. i can walk it easily now.

get it!

[MISFITofMAGIC]

so i will be able to walk it w/o a 25g switch?
how many BPS u think u can get at least 10?

[spyvspyder]

with a 250g switch i can do 10, but i want a 50g switch. i thinik i might be ordering one

[P4in7B4113r]

yea with your stock 250g switch you can do about 10.If you want to shoot faster i wouldent get a 25g switch becouse you may have a problem with ramping, i would suggest on getting a 50g. I know a guy who will sell them for 6$ including shipping if your interested.

[P4in7B4113r]

Phat boy who well does that reg work on your gun

[spyvspyder]

about the 50g switch, i need it installed too, and i think that costs 14 bucks with shipping.

[P4in7B4113r]

its 12$

[P4in7B4113r]

spy nvm you already talked to him

[PhatBoy00]

you should be able to install the switch yourself

the reg works prety good. only been to the chony with it once and i forgot i had a light spring in and couldn't figure out why i couldn't get my volosity up (duh) but the spred wasn't that much proly about 4-6 fps on its first use so it hasn't been worn in yet

[MISFITofMAGIC]

i think i can install it myself what to i do solder it on? or does it take more then that?

[spyvspyder]

what is a solder anyway? i would rather just get someone to install it

[P4in7B4113r]

Phat boy where did you get the reg?