Official FS reg settings DB

[Harbinger[TG]]

FREESTYLE OWNERS ONLY
KEEP COMMENTS TO A MINIMUM....PM SPECIFIC USERS

HARBs FS

SN 40286
New Valve
New Board code

AKA Sidewinder

MY current settings:
LPR ? not sure
HPR 190-215


NOTE: these are not my permanent settings, this just happens to be the area of testing the last few weeks.

http://www.harbtech.com/Pics/akafs.jpg

[jhansen]

Mine FS

SN 40375
Old Valve
Old Board code

Stock

MY current settings:
LPR ? not sure
HPR 230-250

[Sherlok]

Mine FS

SN 40093
New Valve
Old Board

Stock Reg
Current Settings:
LPR ?
HPR 270-300

*PIc Coming*

[Leoman69]

Uncle Leo's FS
SN 40320
New Valve
New Board

Stock Reg

LPR ?
HPR - 215-230

[rushfan9]

rushfan9

SN 40001

Old Valve

Old Board

Stock Reg

LPR - unknown

HPR - 280

Tank - 68ci/4500 Nitroduck X-Treme

Tank Output PSI - 400

Thought the last 2 might be pertinent.

Mike

[Eric the Great]

Eric the Great
fs# 40016
newer valve
chaos SO board V2.2
dwell 14ms
Dye Hyper 2
68/4500 tank
Hpr 300-350
Fps 280-300
shots per fill: 950-1050
http://webpages.charter.net/knefelkamp/Erics%20Paintball%20Pics%20DO%20NOT%20DELETE/fsfull.jpg

[Simpsons11]

Simpsons11 FS

SN: 40925
New Valve
New Board code


MY current settings:
LPR: A little more then 1/2 turn from when the noid starts to leak
HPR: 250

Shots per fill: Off a fill 68/4200 PSI I got 1000 shots.

[irieJUJU]

SN: 40505
NEW Valve
NEW Board Code

REG: stock
LPR: unknown
HPR: 260
TANK: 70/4500 stubby dynaflow
TANK OP: 500

PICS: coming soon

[ShootPaint]

http://www.shootpaint.com/photos/FSRed.jpg
SN: 40239
Stock old style valve
Old Code

Reg's stock
LPR: not measured
HPR:275
Tank 68/45 Nitro Duck Mega Reg
Tank OP 400psi

Shots per Fill 9-1000

http://www.shootpaint.com/photos/FSBlue.jpg
SN 40244
Custom Valve and bolt pin
New board Custom Code

CP Hpr
Stock LPR (should be replaced with Rock within a couple of weeks.
HPR:225
LPR: Unmeasured
Tank: Nitro Duck 68/45 Mega Reg
Tank OP: 400psi

Shots 1200-1300

[Chris at Tech]

So I actually took the time to mess with the regs at the field yesterday...

On my stock gauge, it appeared I was running sub 250psi to get 280ish psi previously. On my newly installed MacDev 0-300 gauge, I needed 280ish psi to get 280ish fps. To put it in friendly format

New valve
New board code
LPR: Stock, 1/4 turn past complete cycle point
HPR: Sidewinder, 280
Air source: 88/4500 HP Crossfire
Shot count: too lazy to count

I partially attribute the high HPR pressure needed to the heavily ported Ultralight I was using yesterday, as I previously used a Scepter kit. I'll check next time...

[Harbinger[TG]]

Does anyone have their MIN/MAX settings... I CANNOT run my hpr over 280is, i can run decently around 180-200

[Chris at Tech]

I can't seem to get a usable FPS under 250 psi. I haven't gone higher than 290ish psi because my gauge is 0-300 and I don't wanna blow it :)

[Monke]

i currently have mine

HPR(Sidewinder):290

shooting 290 +-1

[bulzeye]

black to gold
SN#40170
hpr-cp reg 280 for 289 fps +- 2
lpr ?
new frame
new board
new valve.
1150ish shots off 68/45

[infidile]

HE bolt
05 board
HPR-340psi
LPR-5mm of threads showing(gap inbetween)
shots=unkown for now.(needs to get broken in)

[infidile]

update of my 05
HPR-280
LPR-enouph to barely put my finger nail in it
shots-3 pods and a halo off a 68/3k

[COLD_ICE]

would someone be kind enough to tell me how many turns of the wrench their settings are i am having a problem with my friends gun and i cant seem to fix it for him... or maybe even stock settings

[Zio7]

Zio7's 2005 Freestyle
HE Bolt
HE Valve

Input: 850
HPR: 350
Velocity: 275-280

[kwik]

SN# 1735
05 board, valve, HE bolt
input: 450-550psi evil scion
HPR:275-325 = 250-290fps
LPR: breech cleared

im doing the first break down and relubing of the regs tonight and hope to be at the field tomorrow to chrono and Ill et more accurate #'s then.

also my FS is still new maybe 2 cases of paint through it and 3 or 4 3000psi fills of dryfiring.

[Harbinger[TG]]

http://www.harbtech.com/spogear/spofs2.jpg


UPDATE:
HE installed

HPR about 330ish
LPR umknown

1st weekend i was getting about 1/2 case on 2000PSI from a LP 70/45

[kwik]

well after the break down and lubing tonight my HPR is currently set at 250 and the LPR tuned to where it seemed to cycle the best(went through about 2500psi of dry firing), tomorrow night at the field Ill get more accurate settings per FPS marks.

http://members.cox.net/roninimf/paintball/DSCF0485.JPG

[FMpaintballer]

how do you guys get such low presure from your HPR? i havn't shot over a crono yet, but it shoots best around 350-380.

[LazyTerrahawk]

Ya, i cant get either me or my teammates guns to run below 325-400 ish. We have been using either dye slick lube or shocker grease to lube the internals, and have not yet broken down the lpr or HPr to lube. Is superlube all the difference in the world? We are supposed to have the HE bolt kits.

[Pressure-Jeff]

let it break in, ever case i ran it got better.

im on like 8 cases now and i do 280fps at low 300's

i did see a difference from dye lube, radio shack lube and dow 33 to super lube. No clue on the reason, but i found that it lowered my hpr pressure after using it for a little bit by 10-15 or so.

[LazyTerrahawk]

Im guessing your saying that the super lube lowered your pressure by 10-15?

[kwik]

update: after almost 3 cases of paint and at least 5-6 3Kpsi fills of dry firing I got new numbers at the field last night....

For 250-260fps(field limit) I was at 280psi from the stock HPR with the LPR set appropruately for cycling and breach clearing. This is down from the 300-310psi I had run 2 times ago.

[DeathsGuard]

What are the best reg settings for a NDFSP with nox reloaded and HR-1

its running at 300 psi for hpr, and no idea for the lpr.

Should i lower the hpr pressure a little? I still get some kick but its not very much