GUn LOCK FOR A MONGOOSE>???

[binger19]

IM lookin to see if ne one knows were to get a lock for a Mongoose LCD im in desprite need of onEEE thanks alot

[Thormx15]

just put it on safty or something

[platinum_player2005]

i think he means a tourny lock, but i don't think you can get one, at least i don't know of any

[Ezeehc]

yes, ther eis a tournie lock on the board. It is a little black theng by the lcd screen. Atleast, on the dip switch model there is. Just pull it out. I am not responsible for negthing being broken though.

[binger19]

whats the dip switch model and can u put this black thing back in

[jcloudshoota]

It looks alot like the black dragun frames....

Take off the LCD screen by removing the three screws that hold the board assembly on. Then take apart the LCD screen by pulling it off of the board. Note: DON'T FORGET WHICH WAY THE SCREEN WAS CONNECTED TO THE BOARD!!!! Next, you will see three power connecters. above one of the connecters there is a little chip that you can remove. Remove it and DON'T LOOSE IT. Reassemble the LCD screen and board. YOU'RE DONE!! If you loose it, you will loose all the extra functions of the board.

[binger19]

THANK YOU SO MUCH i realllllly needed help w that