Sliver bullet Regulator screw help

[trains are bad]

My bud got this thing and the regulator has a little countersunk screw on the side that says "adjust>>>(screw)" Anyway it's leaking around the screw so I'll loctite it but I'm wondering if it's actually a pressure adjuster or what.

[orangecapri]

yes, its the adjustment screw for the regulator.

[ImpulseKiller12]

Yea it is i figured that out when the freaking thing was at 400 psi and almost took my hand off.

[jcloudkilla]

what would yall recomend setting it to??

[JxTxCxNx]

The Silver Bullet regulator SHOULD NOT BE MESSED WITH. It should have come from the factory with a orange warning label. If your screw is leaking, take it to a pro shop for replacement or send it to Psycho Ballistics.

I would NOT mess with it yourself!

[jcloudkilla]

Originally posted by JxTxCxNx
The Silver Bullet regulator SHOULD NOT BE MESSED WITH. It should have come from the factory with a orange warning label. If your screw is leaking, take it to a pro shop for replacement or send it to Psycho Ballistics.

I would NOT mess with it yourself!


why what would happen?

[Angel_Kid2067]

yea , use the loctite or screw it in all the way

[Kevin_nps]

DO NOT LOCTITE the screw, what happens is when the adjustment screw is adjusted too far in, or backed out too far, the internal reg piston's o-ring is snapped from it moving out of place incorrectly, you need a new pin. PM me and I will get a new pin sent out for you with instructions on installing it.