Rebel Expansion chamber

[Mick]

I have a rebel bottomline with no expansion chamber but i am going to put one on...

I was wondering if i need to buy a kit, or...can i just buy the single expansion chamber?

Also...does the bottomline hookup to the expansion chamber at the bottom...

Is there a hole in the bottom to put the bottom line on?


do i need the bottomline if i just got a single expansion chamber?

another thing does every expansion chamber fit each other???


PLZ *HELP* ME


I am pretty lost in this matter (Im not a newbie tho) :)



Greetz

Mick

[sorisko]

Hey Mick,
I will answer your questions as you had them posted... if you have anymore questions please ask...

I was wondering if i need to buy a kit, or...can i just buy the single expansion chamber?
You can buy the expansion chamber, but you will need to buy fittings (90* Elbow, Hose)

Also...does the bottomline hookup to the expansion chamber at the bottom... If you were looking at the PB Xcore, at the very bottom you put a 90* elbow, and hook the hose upto that, and then upto another 90* elbow, that goes to your duckbill...


Is there a hole in the bottom to put the bottom line on?
At the bottom of the Xcore expansion chamber yes, you put a 90* elbow there, and connect the hose to it, then to the 90* elbow on the duckbill

do i need the bottomline if i just got a single expansion chamber?
Yes, you will need a hose to hook up between the duckbill, and the expansion chamber

another thing does every expansion chamber fit each other???
All standard Expansion chambers will fit on your rebel... I strongly recommend the PB Xcore because its 8 stages, it will keep out liquid C02, and for the price you cant beat it........ If you have any more questions please feel free to ask......



**Note: I dont know what size hose you will need, I highly recommend getting macroline... you cut it to the length you need, so there is no quess work in what size steel braided hose you will need....... you really cant use the stock hose that came with the gun.. it will be too long...... **


~sorisko

[sorisko]

This is what the Xcore Expansion Chamber will be set up like..... although you may only need (1) 90* Elbow, you will still need the Expansion Chamber, and a hose.... like I said before, Macroline makes it a lot easier

[predball85]

hmm, i dont know about that

[spud majic]

the rebel bottomline's duckbill comes out at the front. you will not need a 90degree elbow there. if the chamber you get has input in the side then a elbow will not be needed there either. if it is in the bottom then you will need one. you can use the stock hose but it will be bent pretty far. i would get a shorter hose probably around 6"