WHut parts of a Bushy would fit a tribal??

[AgEntGuMbAll]

I am wondering, whut parts of a bushmaster would fit a tribal. Ive heard things about their silenoids and valves but would they work??

[Kevmaster]

solenoids do. youll need a drill tho. some bolts do. dont think valves do. some angel high rises do

[Have Blue]

Yep, solenoids need to be drilled out for the 2mm mounting screws (Bushies use the 1.6mm screws that come with the K4H01 valves).

Bushy valves can work in a Tribal, but you have to do a bit of modification. Defiance did it, but now can't get the valve out :-)

Angel high rises will technically not work - they use different thread pitches. However, some people have had limited success with them. It's not a sure bet, though.

Bushy bolts will fit into the Tribal, but they are quite sloppy. Stick with the stock bolt or get a handcrafted masterpiece from DEZ.

[Dutchboy69]

where is DEZ and what are some other good upgrades for a tribal

[Have Blue]

DEZ iz at http://www.geocities.com/dezignbolts/

Other good upgrades... Hmmm... Sonic LPRs are great (if you can find one). Alternatively, I've got cocker LPR adapters on the way and me262 has some as well. MacDev has their Sonic ASA, but it's really not a performance upgrade (MacDev also has the best ball detents I've seen) - their RED valve will give you more flow, though. General Joe's has replacement valve stems if you don't require a whole new valve body. And upgrading the inline reg is a must - I recommend the Sidewinder. As for electronics upgrades, there's the Fury chip and the Warlord.