Ego feedneck on quest.

[Drew-Ill]

I seen a custom annoed Quest with a ego feedneck, does anyone know how to do this? i have a clamping feedneck from FEP but, it doesnt clamp a vlocity inless i tape it. anyways.... do you think it would be hard to do?

[LU_aDaK]

His threads were stripped so he tapped it for a sleeve and then put the ego feedneck on the sleeve. I would say difficulty is a solid 4/5

[Drew-Ill]

lol yeah il stick with the tape.

[Dirtyion]

you could also weld it

[Doesitmatter]

shut your mouth...^^^

[fAllout_oMen]

My vlocity fits just fine in my stock feedneck tighten it down more. i've used a regular vlocity and vlocity jr both fit, so use some muscle and turn that little clamp screw on the side.

[GET_SMOKED]

shut your mouth...^^^

Dont come in the FEP forum and start dissing people. No flaming. Use dodgys if your joking.

[pb ERIC]

My vlocity fits just fine in my stock feedneck tighten it down more. i've used a regular vlocity and vlocity jr both fit, so use some muscle and turn that little clamp screw on the side.

or get a allen key that fits it to make it even more easier

AND BEST OF ALL...buy a clamping arm ring..from FEP

LIKE omg (http://www.firstendeavorpaintball.com/shop/default.html)

[Doesitmatter]

Dont come in the FEP forum and start dissing people. No flaming. Use dodgys if your joking.

sorry i apologize
and yes i forgot to put the dodgy in

[Drew-Ill]

i dont use a stock feedneck, maybe with the stock it clamps down but not with the clamping feednecks. i own a vl jr and i assure you it does not fit.

[NYGuardians capt.]

i dont use a stock feedneck, maybe with the stock it clamps down but not with the clamping feednecks. i own a vl jr and i assure you it does not fit.

you mean the lever one? i had the same problem the lever and tightening screw thingy are put together backwards, notice how the lever has an entrance and exit hole for the screw? just put the screw into the hole that its currently exitting out of.

[HarvesterOfSorrow]

Not quite, his threads were striped, but still intact. He took a matrix sleeve that was wider, and got it to fit after fileing, thne atatched teh ego feedneck to the sleeve.

[MiLLz]

my bionic head lock also does not hold the vlocity. the screw broke when i tightened it. I replaced it, and then the knob stripped. fantastic.

[ProtoAddict]

http://www.pbnation.com/showthread.php?p=36613263#post36613263

Here is the thread with the ego feedneck on the quest, ask him if its hard :dodgy: