Quest

[Cocker_Madness]

Hi guys, I want to know a little bit of the Quest.


1) I want to know how is the maintanance? easy or hard, take time or not.

2) The performence of this gun. The consistency and accuracy of the shots

3) If I buy this gun what are the upgrades this gun needs?

4) The stock reg is great or not?

[pballer2003]

well the gun is great all over, the gun does take a little more matinance then other guns but its not to bad. the performance of the gun is excelent it is consistant and is dead on even with the stock barrel and it really doesnt need any upgrades its great stock. the reg is decent thats about the one thing that u might want to replace

[pballer2003]

anything else really just read the stickys

[black/red outkast]

well the gun is great all over, the gun does take a little more matinance then other guns but its not to bad. the performance of the gun is excelent it is consistant and is dead on even with the stock barrel and it really doesnt need any upgrades its great stock. the reg is decent thats about the one thing that u might want to replace

bah, dont listen to this guy

the maitenence for the quest is rediculously simple, coming from trix's and shockers its a dream... the bolt is two peices with 6 or 7 o rings and is simple as hell to lube, maintain... the gun is very simple and does not take long to learn it inside out, and if anything goes wrong you have the great customer service of FEP (comparable to BLAST) and this forum to help you out

the stock reg is excellent, the only reason people change it out is because some dont like the macro positioning, i put an o ring on top of my reg to help that

the gun is small, light, has very minimal kick, and is fast as all get up... hands down the best stock trigger ive shot

[pballb0i]

Uh dont even let me get started it takes like a whole 30 seconds to lube and the container they give u will like only last u 8 months or so and the customer service OMG it is slow and they have u your stuff right away and always answer when u call and are very helping can u believe these people.

[jhchawk]

Uh dont even let me get started it takes like a whole 30 seconds to lube and the container they give u will like only last u 8 months or so and the customer service OMG it is slow and they have u your stuff right away and always answer when u call and are very helping can u believe these people.

correction
fast. haha

[fAllout_oMen]

Hi guys, I want to know a little bit of the Quest.


1) I want to know how is the maintanance? easy or hard, take time or not.

2) The performence of this gun. The consistency and accuracy of the shots

3) If I buy this gun what are the upgrades this gun needs?

4) The stock reg is great or not?

1) Very easy. Takes one allen key to remove bolt pin, then lubing bolt/bolt pin takes roughly a minute if your good at it. LPR and HPR dont need to be lubed as often but all that takes is unscrewing the cap and lubing one o-ring a peice.

2) Very good. Accuracy w/ small bore paint in the stock .696 barrel isnt the greatest. larger bore paint is better. always can get a cheap barrel kit anyways.

3) Upgrades?
-snatch pin(toolless removal of the bolt)
-grips(some think stock are too thick)
-goldmember bolt (more efficient)

Most upgrades are personal preference. It doesnt need much.

4) Stock reg is average, not very good but not bad either. It's alright and not a neccesary upgrade, but if you want to , go ahead.

[ghost271]

I actually found the reg to be on par with the CP reg. Its just that most people dont like the placement of the elbow so high up on the reg. Personally, I found after playing a few games with it that I didnt even notice it.

[Cocker_Madness]

Well I like this gun because the bolt it's just two pieces and the low quantity
of o-rings. But the thing is that I am right now looking a new gun and I am choosing between a Quest, DM6 , Shocker nxt , or Redz Ego. Foe me is really hard beause this gun are really good, but I cant test them in the field that I play because noneone have this markers.

[Blackrain7557]

quest will beat all of those out in any category, but

Definitaly stay away from the NXT, it really is not worth it,

DM6's are nice, small and light

I hate egos

Quest rules!

[fAllout_oMen]

all of us here will say quest, because we love them.

[Humbled]

Three things we considered and accomplished when we decided to deign this marker.....

1. Simplicity.......OMG that's an understatement
2. Consistency....OMG Zero drop regulator (Do not Replace) this gun shoots frozen ropes corner to corner!
3. Efficiency........OMG How's 45 to 90 PSI operating pressure and 1900 rounds off a 68/45 out of the box?

Done.....Any QUESTions?

[Dirtyion]

wait for the price to drop then buy one

[kleivonen]

Three things we considered and accomplished when we decided to deign this marker.....

1. Simplicity.......OMG that's an understatement
2. Consistency....OMG Zero drop regulator (Do not Replace) this gun shoots frozen ropes corner to corner!
3. Efficiency........OMG How's 45 to 90 PSI operating pressure and 1900 rounds off a 68/45 out of the box?

Done.....Any QUESTions?



Just don't get banned for corporate spam...

[Cocker_Madness]

Where I can find quest upgrades?
I might buy a black dust quest but I still dont know what to chose the 2generation or the 3generation.

[Blackrain7557]

www.firstendeavorpaintball.com

www.xtremepaintball.com

[Cocker_Madness]

Thanks. Well I haved make some research this past 2 weeks and I concluded
that the quest will fit with me. My actual marker is a 04prostock and this marker has gave me problem so much that I said to my self I need to buy a new marker but that doesn't have to be so complicated like the cockers, don't get me wrong I know how my marker works and everything supose to know about cockers maintanance. But what I really hate is that no matter how good I take care of this marker something goes wrong, I have been repairing more and playing less, I hate that. So start this research looking for a new marker, when I found my self choosing one of this markers: DM6, Redz Ego, Shocker or Quest. I said to my self "what marker is the best?''

So I comprared this guns

Shocker= Well I didnt research that much because when I found the quest, quest kick the *** of the poor shocker.( dont get me wrong I did some reaserch, but i liked more the quest) Well I compare the internals and I saw that the quest is more simple than the shocker have less o-rings and pieces.

DM6= Well I liked the DM6 but when I saw this maintanance, too many
o-rings. I said dammm theres more rubber than metal and I alredy haved a expirience with a matrix rail that I was repairing that ít's was leaking and changed like every o-ring of the dam bolt and really couldn't stop the leak.
and the quest have less o-rings and pieces.

Ego= well this was a though decision, ego or quest. Well the maintanance are simples in both markers, weight both are light, accuracy both are accurate but what I like more from the quest is that noneone in my field have seen a quest and that i like it. Everybody have or haved seen a ego, shocker, angels, dm and many others but noneone have a quest. Besides when I saw the quest grips I felt in love with that demon when the eyes changes in colors. The other thing that I compared is price, Well both markers shoot a ball at 300fps why waste more money if I can buy a more cheap marker like the quest.

Well what i haved to said QUEST FTW!!!!!!!!!!!!111111

[Cocker_Madness]

I want to know what you think

[LU_aDaK]

Three things we considered and accomplished when we decided to deign this marker.....

1. Simplicity.......OMG that's an understatement
2. Consistency....OMG Zero drop regulator (Do not Replace) this gun shoots frozen ropes corner to corner!
3. Efficiency........OMG How's 45 to 90 PSI operating pressure and 1900 rounds off a 68/45 out of the box?

Done.....Any QUESTions?

Damn guess everything is corporate spam now days. Maybe he was banned for a different post....I wouldnt doubt it lol

[bballryand316]

Banned for a post on FEP's new Raider grips.