PDA

View Full Version : Lucky Board Programming modes


MiLLz
06-01-2007, 05:31 PM
So in my new Lucky board there are a little under a million programming modes and half of them are not in the manual. What do they do? I am listing the modes in the order that they show up. Thanks in advance.

Blinking color means a single blink every half second or so.

01 solid purple - quickstart modes
02 solid teal - eye sensitivity
03 solid red - dwell
04 solid blue - anti FSDO
05 blue strobe - ???
06 solid green - debounce
07 green strobe - anti mechanical bounce
08 blinking green - ???
09 red strobe - max ROF eyes on
10 blinking red -
11 purple strobe
12 blinking purple
13 teal strobe
14 white strobe

manu57
06-01-2007, 06:18 PM
01 solid purple - quickstart modes
02 solid teal - eye sensitivity
03 solid red - dwell
04 solid blue - anti FSDO
05 blue strobe - FSDO Time
06 solid green - debounce
07 green strobe - anti mechanical bounce
08 blinking green - DML Debounce Mechanical Limiter
09 red strobe - max ROF eyes on
10 blinking red - max ROF eyes OFF
11 purple strobe - Fires Modes
12 blinking purple- Ramp activation
13 teal strobe- Safety shots
14 white strobe- Ramp time out

MiLLz
06-01-2007, 06:44 PM
Thank You! do you perhaps have this on a pdf stashed somewhere?

jeffreyjames
06-02-2007, 01:07 AM
this is what your manual is for!

i unfortunately dont have a link, i printed out the lucky manual so i could take a good long look at it offline. theres several folks that can give you the online link if it still exists or maybe even some help with what you need. if you bought it, you SHOULD have the manual tho.

MiLLz
06-02-2007, 02:21 AM
I found a link in the ultimate sticky but it was broken. The site only has the generic ace chip programming but it doesnt include the modes that were missing. I received the chip from the store that fixed my quest and the only manual they gave me was a print out of the ace chip programming (the one that doesnt have the info i need) It also says in my original post that the manual I have did not include info about the modes I found.

I would be reading the correct manual right now IF I HAD ONE. It would be helpful if maybe you could scan the manual for me so that I could also spend some time reading. But thanks for your advice either way.

manu57
06-02-2007, 05:29 AM
You haven't got a Ace, you have a Spitfire board.
Send me your personal mail via PM and i will send you the PDF manual.

MiLLz
06-02-2007, 07:47 PM
Ah ha. Figures. Thanks.

jeffreyjames
06-03-2007, 03:13 AM
there ya go. i tossed out my spitfire manual after all the hullaballoo with lucky since i decided i will be getting a diff board now. otherwise id have been more than happy to have scanned it for you or whatever. but yes, like the other person said.....you should have the spitfire board and can find that manual.