PDA

View Full Version : Quest noid question

foam27
06-01-2007, 04:22 PM
In this picture, which prong on the noid is positive and which is negative ? the far or close one ? And also, I know that on the batt. noid harness, there are 2 wires that go to the 9v. connector, and two go to the noid, which wire is positive and which is negative ? the one on the edge of the plug or the inside of the plug ? by plug I mean the white connector that plugs into the board, just to make sure I am clear.

http://i206.photobucket.com/albums/bb209/foam27/paintball001.jpg
Physcojosh
06-01-2007, 04:47 PM
gimme a 2 mins, I will tell you
Physcojosh
06-01-2007, 04:53 PM
The Prong Closest to Us is Black.. the other is idk.. Green..Brown? <color Blind> And i Belive Male is Negative.. and Female is Positive.. Funny that.. life works like that.. HAHA
foam27
06-01-2007, 04:57 PM
The Prong Closest to Us is Black.. the other is idk.. Green..Brown? <color Blind>

Ok, thanks alot, and one more thing, it will work fine if I solder the wires with heat shrink directly on the noid prongs right ?
Physcojosh
06-01-2007, 05:00 PM
yea should be fine, Ive done it to a Few of my Noids .. infact when i picked up a New Noid for my quest <HandPicking Ftw> i ripped the wires off my Old one and Resoldered it.. Works like normal, and now i can only blame myself if it doesnt work.

And reread my other post.. Male is negative,Female is Postive
foam27
06-01-2007, 05:05 PM
yea should be fine, Ive done it to a Few of my Noids .. infact when i picked up a New Noid for my quest <HandPicking Ftw> i ripped the wires off my Old one and Resoldered it.. Works like normal, and now i can only blame myself if it doesnt work.

And reread my other post.. Male is negative,Female is Postive

lol, true.. true...
jeffreyjames
06-02-2007, 12:03 AM
i dont recall the specific colors in the grip frame but red is usually postive and black negative. this is another very good example of why folks should pay attention to what the fuck they are doing when the screw around with thier shit. as well as a reason NOT TO FUCK AROUND with your shit.
foam27
06-03-2007, 06:57 PM
I fixed it, and by the way I wasnt the one who messed it up, it was the person who owned it before me, just incase you were aiming that comment at me.