Got some Questions about the Quest, Thinking about getting one.

[-The-Phantom-]

Hey guy, Well quest have sparked my interested lately and I'm really thinking about tradeing for one

First off are they easy gun to take care of? By this I mean do they take alot of maintenance and do they tend to brake down alot?

Second I heard that some pro team using quest had EVERY single gun brake or would even shoot because they chopped soo much.

Also what are the deferences between gen 1,2,3??

Thanks guys!

[Empire03]

well i dont have a quest but a dude on my team has one well

1.well its the user its not gonna ever break down if u take care of it but one its time fr maintnece is a very easy task

2.i dont know of any gun that dont work bc of a chop except spyders

3.yes there is diffences u would be better geting a gen 3

[-The-Phantom-]

well i dont have a quest but a dude on my team has one well

1.well its the user its not gonna ever break down if u take care of it but one its time fr maintnece is a very easy task

2.i dont know of any gun that dont work bc of a chop except spyders

3.yes there is diffences u would be better geting a gen 3



Well by chopping and not working I mean they chop and were soo inaccurate after that they would even shoot

[Empire03]

i seriously doubt they was choping but prolly barrel breaks

[FEPspy]

Hey guy, Well quest have sparked my interested lately and I'm really thinking about tradeing for one

First off are they easy gun to take care of? By this I mean do they take alot of maintenance and do they tend to brake down alot?

Second I heard that some pro team using quest had EVERY single gun brake or would even shoot because they chopped soo much.

Also what are the deferences between gen 1,2,3??

Thanks guys!

1) yes easy to take care of lube 6 orings and ur good to go
2) that was raider at lao and that was due to bad weather from what i heard
3) basically the diff gen determin what parts came stock on ur quest

[Blackrain7557]

guns are very easy to clean and take care of,

all teams at the L.A. Open had major problems with paint, the raiders problem was that the boards werent good, they have changed that now, and the LPR was too high so the chilled hellfire wasnt performing as expected.

gen1, hard to find

gen2 chip board

gen3 was board

gen4 lucky board of some sort

[bballryand316]

1. They take forever (http://youtube.com/watch?v=AOipif2reMU) to lube. (Watch that tremendously long video)

2. Bad boards/not broken in/LPR issues. All of which are fixed now. That was for Raider's team Quests.

3. This post, look down a little bit. (http://www.pbnation.com/showthread.php?p=29751462#post29751462)

Hopefully I helped; you're Trevor's friend, so I don't mind.

[-The-Phantom-]

Thanks guy, Well I'm really considering trading one for my 06 Hybrid shocker or my ego

[bonkers_112000]

my quest shot fine at LAO we were shooting empire inertia (so yes it can shoot brittle paint)

your better off gettting a gen3

and lube up the bolt everycase or so with hater or dow 33/55 doesnt matter i use them all with no problems

[Botto88]

Make sure you get a Gen 3. VERY easy to maintain and light too. I love mine. Good stuff. However i think im purchasing a ego7 now haha

[bballryand316]

Make sure you get a Gen 3. VERY easy to maintain and light too. I love mine. Good stuff. However i think im purchasing a ego7 now haha

Weight should be the same, as well as maintenance. Actually, could Gen 1's be a tad lighter due to no gauge?

[NYGuardians capt.]

3.yes there is diffences u would be better geting a gen 3

i disagree, the gen 2's come with the chip board and all the features of the gen 3 besides that horrid dust anno and WAS board, so personally if i were to buy another quest i would most definetly get another gen 2 over a gen 3.

[LeftyFlip]

why did you say that the anno was horrid? Was it actually bad, or do you just prefer gloss? And also I saw something that due to a lawsuit between smart parts and wdp you weren't supposed to make chip boards stock?

[black/red outkast]

theres nothing wrong with the dust annoes... i have a dust quest... but imo i do think the gloss is prettier on the quest...

gen 1 dont have a gauge for the lpr... and take different grips (old school angel grips i believe)

both gen 1 and 2 have chip boards

as stated above the gen 3 have the was board (some people dont like the was board, some were faulty and others had bounce issues... my was worked ok but i opted for a chip board so i could run NOX)

some gen 4's have the lucky ace software, as also stated above

no matter what gen you get its basically the same gun, only small differences such as different boards, grip screw placement, and lack of a guage

the quest is an excellent marker with great effiecency and speed... easily the best stock trigger ive ever shot... and with a two piece bolt with 6 or 7 orings maitanence is a breeze

also F.E.P. has great customer service... and the 007 barrel is wonderful, my favorite barrel, and it was stock too!

[Dye_Fanatic]

guns are very easy to clean and take care of,

all teams at the L.A. Open had major problems with paint, the raiders problem was that the boards werent good, they have changed that now, and the LPR was too high so the chilled hellfire wasnt performing as expected.

gen1, hard to find

gen2 chip board

gen3 was board

gen4 lucky board of some sort

there's a gen 4???...pics please

[imped4now]

there's a gen 4???...pics please

As stated about 10^8 times, from gen 2 to gen 4, quests will look identical. It just comes with a different board stock, the lucky board instead of the WAS board. I have WAS and actually like it, so I feel no reason to get a lucky board.