???

[pbstar27344]

you know how on the actual solenoid there is one side where theres a little hole in it? well which way does that face? side A or B?

[pbstar27344]

any1??plz

[LU_aDaK]

A) Next time please use the area marked "Thread Subject" for more than just "???" If you didnt have a question you wouldnt post, instead try to be specific.

B) When you as a question in the Body of the thread, BE SURE TO BE AS SPECIFIC as possible. If your question seems vague, or doesnt get a responce, try to be more specific, maybe even utilizing pictures.

C) ***BEFORE YOU EVER MAKE A NEW THREAD, LOOK IN THE STICKIES!!! -Please be sure to either learn proper usage of the forums or just gank the cord out of th wall connected to your cable,dsl,satalite, or dialup internet connection and save us all the heartache. (if you have a notebook, urinate on it.)


AS A LEARNING EXPERIENCE, I will guide you through the difficult process.


1) Click Ultimate Sticky
http://img182.imageshack.us/img182/8642/scr2520258yz5.th.png (http://img182.imageshack.us/my.php?image=scr2520258yz5.png)

2) Choose the 1.6 manual, I am guessing you dont have a hard copy
http://img513.imageshack.us/img513/1893/scr2525d2asw6.th.png (http://img513.imageshack.us/my.php?image=scr2525d2asw6.png)

3) Click manual to open up the adobe image of the manual
http://img512.imageshack.us/img512/8102/scr252b0e7lp4.th.png (http://img512.imageshack.us/my.php?image=scr252b0e7lp4.png)

4) Scroll down to the page which has the information you need, in this case page 4.
http://img502.imageshack.us/img502/4607/scr254c57fyq3.th.jpg (http://img502.imageshack.us/my.php?image=scr254c57fyq3.jpg)


Tada! Thats your noid, and now you know which direction to use. (Just an fyi, YOU SHOULD NOT BE CLEANING OR DETATCHING your noid unless there is a severe problem AND YOU HAVE SPOKEN to the techs at FEP who have instructed you to do so.


:eek:

[ckybikerlj]

owned!

[pbstar27344]

just fyi, i did look at the sticky and it doesnt say which way the actual noid should face oh and if my noid is leaking then would that be a bad enough problem??!

[paprercut88]

lol pwned

[NYGuardians capt.]

just fyi, i did look at the sticky and it doesnt say which way the actual noid should face oh and if my noid is leaking then would that be a bad enough problem??!

no, that problem has been addressed numerous times before, try using the search feature. lets see possible causes for a leaking noid are: (these are from memory so bare with me)
middle bolt o-ring
LPR pressure too low or high
blown noid
you did some stupid shit to your noid like took it off the gun and poured water into it
the noid o-rings have nicks on them, take it to a professional to replace them unless you are a God of repairing solenoids

[LU_aDaK]

just fyi, i did look at the sticky and it doesnt say which way the actual noid should face oh and if my noid is leaking then would that be a bad enough problem??!

My picture came from the sticky, what more do you need as far as where to point it. And if its leaking I suggest calling FEP. They might beable to diagnose the problem. Also a thread labeled, leaking noid would have allowed us to better serve you.

I was not trying to be an ass, it is just that with the huge influx of may/march 07 members that dont understand forum usage, a lesson needs to be given

[pbstar27344]

ok, i replaced the bolt o-rings, and now i dont want to put the noid back together for fear of putting it in the wrong way and blowing it. the actual noid, the silver thing if that helps you, has a little hole in the middle of it. shoul that face side A or B? i have called FEP but they didnt answer and its not like i need to send in to them so can some1 just tell me which way it faces?? thx and im sorry if i angered you and wasnt more specific

[LU_aDaK]

I dont have a quest or noid to take apart anymore, snap a few pics and I might beable to guide you back together....sorry I didnt notice you took it apart

be sure to be EXTREMELY sparing on the lube, just enought to "make it wet"

[pbstar27344]

my camara is crapping out on me so il do it once i get it fixed sry

[pbstar27344]

heres the pics

http://s194.photobucket.com/albums/z53/pbstar123/?action=view&current=Solenoid.jpg

http://s194.photobucket.com/albums/z53/pbstar123/?action=view&current=Solenoid2.jpg

[jeffreyjames]

i havent taken mine apart to tell ya. but a) pay attention when you take things apart and b) lay them out the way they came out to make it easier to put them back together properly. kinda curious why you had to take the whole thing apart in the first place.

[rinso]

If I understand correctly, your question shouldn't be "which way does the solenoid go in," but rather it should be "which way does the solenoid piston go in?" As for an answer, I wish I could tell you, but I don't know; I've never taken my noid apart. As stated before (just to emphasize the point), you should never have to take apart your noid unless you're having some serious issues with it.

[pbstar27344]

i was checking 2 see if there was a blown o-ring and can some1 just say which way?? ive called fep but they didnt answer yet

[paprercut88]

http://www.pbnation.com/showthread.php?t=1989013

dm4/5/c/pm6 use the same solenoid and some1 should put this link into the ultimate sticky so some1 doesnt screw up their noid

[black/red outkast]

come on fep forum... we are the nice helpful forum remember

[ghost271]

I think the picture shows which way to place the noid very load, and clear. The wires from the noid are facing towards ........................? THE FRONT of the gun.

[paprercut88]

hes talking about the piston