pt extreme not shooting

[makeITrainonem]

ok like the title says i put a brand new co2 in and no leaks i cock the bolt and fire and it does the little sputter like their is no co2 and it just spits the ball outta the barrel and goes like 2 feet. any help would be appreciated.

and one more question, is the little gold screw on the bottom standard or metric so i can put a bottom line on.


thanx
mark

[paulpker121]

burn it? thats how i fixed mine. then, it worked fine.

1. pour oil over marker
2. throw in fireplace
3. throw in a few matches
4. wait for 5 hours
5. take out marker and buy a new one
6. there u go ur done

[esmedic694]

have you cleaned your valve assembly and puncture pin? if the mechanics cycle fine the problem is probably there...

[nickzaremba]

burn it? thats how i fixed mine. then, it worked fine.

1. pour oil over marker
2. throw in fireplace
3. throw in a few matches
4. wait for 5 hours
5. take out marker and buy a new one
6. there u go ur done

hahah woww

[jord138]

burn it? thats how i fixed mine. then, it worked fine.

1. pour oil over marker
2. throw in fireplace
3. throw in a few matches
4. wait for 5 hours
5. take out marker and buy a new one
6. there u go ur done

shut up, you bought a spyder.

[hexcts]

have you tried cocking the bolt before you put the 12 gram in, thats what the manual says to do

[Kenny_McCormic]

its a stacked tube blow back correct? if it is then replace and lube you striker oring