Punisher's nano-cocker

[Jiggs]

I was just wondering if anyone owns one, and if they do how it performs.

Also, what are the options and pricing on them?

Thanks a lot

[Volcov]

I have been considering getting one soon too, here's the info I got on them:

If you supply the PGP it is $275 for the basic conversion. Options are plating, .45 grips, etc.. For an ELECTRO-PGP (man I want one) it is $600 and that comes with some options like chrome plating and a few more I think.

If you get one, post what you think :) They look awesome and apparently shoot everybit as well as a nice Cocker.

[DuBri]

only 600 for electro? thats awsome. but I'd still rather have a nasty phoon with a racegun grip on it.

[Punsher]

My computer and more specifically hard drive recently contracted 'InterNet Herpes' and died. I've rebuilt the syste, and am back online, however I can't tell you who to contact that owns one since I also lost all my E-mail addresses....

I can tell you that there are 7 of them running around in various forms and 5 more underway. All of which perform just like you'd expect them to ie:
Pull the trigger and they fire.......very quickly and accurately. They eatup CO2 just as happily as N2, are teeny tine adn very loud. The sound alone in enough to make the weaker hearts out there flee in terror. That's no joke. The last one I built, I tested at the local indoor joint and had several players refuse to go on field until I proved for everyone that it really was chrono'd at legal speeds.
It's so small that it will let you snuggle right up to your bunker and pop out without any fear of it getting caught or bumping anything.

Accuracy is comparable to ANYTHING out there, and we all know the physics behind range (all things are equal) so there's no debate there.

In the hands of the right person there's no reason you couldn't hit 10 to 12 balls a second.

Hope that helps.......

[KilJoy]

Dang I want one, how much co2/nitro do they use?

[Punsher]

I think the last one I built got around 1700 shots from a 20oz. Not too shabby. With the stubby little barrel, it's about as good as you can hope for.

[CaptCocker]

where is some pics?

[KilJoy]

that shot counts awesome. A pic is on the pic thread. Its the black lookin PGP that pun posted

[Volcov]

LOL I would love a loud gun that shoots fast, scare everyone there :)

Does the electro PGP (the one for $600) come with the standard PGP grip or a new .45 grip - or do you have to pay extra?

[DaHick]

If you got anymore questions, just PM punisher, he just joined the boards a little while ago(like a couple of hours.)

[Punisher's Customs]

but I wanted to make a few changes but had little luck so I just redid it.........

[Radioactive Bear]

Can you put a diffrent barrel on it?

[Volcov]

The stock one comes with the normal fixed PGP barrel, but I'm sure if you threw enough cash at it Punisher could make it cocker threads....

Good idea too, gonna find out how much that would cost :)

[KrazyAsian]

you already have enough guns man!!!!

Yeha I mite get my PGP nano-cockered, I already asked Punisher about it though at the BEOG, I'm Nawalan there if you wondered Punisher...

[Punisher's Customs]

I see familiar faces......erm....names all over the place.

[Homie]

Do you do anodizing? If so how much would it cost?

[Punisher's Customs]

It all depends on how may pieces, what prep and what patern.
E-mail me and we can chat....

[hedgehogsforprez]

hey nawalan this is maddproffesor :D

[845]

Ok i have emailed Punisher and PMed him and he hasnt answered either so i will try here.


1. How much would it cost for it to be cocker threaded?

2. How much are 45 grips?

3 How much would it cost to anno the brass peaces to match the black on the gun.:confused:

[I-Man]

I ain't Punisher, but I can answer a couple of your questions:

1_ The PGP is a 1 piece, fixed barrel. it's soldered on there.
You could get an aftermarket barrel and have Pun modify it and solder it ot the valve body (Like Doc's PGP) OR you MIGHT be able to have the rear section threaded (I'm thinking BBT Typhoon here...), but that would probably have to be done from scratch as the stock PGP tubing doesn't have enough "meat".
Either way, it will be $$$

2_ I believe Pun can adapt any Mag or Cocker .45 frame you send him. I'm thinking Mag frames are better, being pivot and all.

3_ You cannot anodize brass, only certain types of aluminum.
You'll have to look to powdercoating or nickle plating to match colour the items.

[Punisher's Customs]

Sorry, looks like our lines got crossed somewhere......I don't think I've recieved any E-mail from you.
try this addy: punishers-customs@home.com
I try to reply within a few days, but I'm doing 12 to 14 hours in teh shop and then PC stuff for a couple hours when I get home....
so time's pretty tight.
I appologize if you got the impression I was ignorring you, farthest from the truth! I also don't have any PMs from you.........Odd......

OK, let's see here.....

1)I can do a cocker threaded body, add $300. It entails my milling a new top section from a solid piece of brass and soldering it on to the Pgp valve tube. I've done it once, but used Phantom threads.

2)Adding a 45 frame is $125. That comvers the cost of the frame, trigger and sear, springs, stops and milling to the frame and trigger plate to fit the Pgp body.

3)Brass can't be anodized, but I can do a few things to give it a nice black look. Baked Epoxy, Parkerize, SOCOM, and Oxa-coat.
Price will depend a lot on what we actually do with the construction of the whole gun so I'll have to wait to quote you that part.

Feel free to try E-mailing me at the above address and we can chat......

[845]

Ok I know I emailed you but I sent it to PunisherPaint@something. I probably f***ed up the PM. Thanks for replying quickly.

[Punisher's Customs]

that'd be the best way to get ahold of me......