Icon Z recocking problem

[baxter499]

Hi, my icon z marker is not recocking when being shot. i've tried co2, air, changing striker and valve springs, lubing the internals (many times) and changing the o-rings. anything else i could do or does anyone have a solution?

[PBBLITZ]

wel....mayb send it back to the manufacturer? if it still isnt workin

[Nepb2]

try the battery. i dont know anything about icon z's, but if its electronic, its worth a shot.

[sp!n]

If its a rechargeable battery, it might be totally dead, and you might need to replace it.

[baxter499]

nah guys its not electronic its a mechanical, soz i forgot to mention it. i'm gettin in contact with the manufacturer though so i'll see what they say

[SilentDeath12886]

my guess is maybe the valve stem is clogged by too much oil, let it sit for a day or 2 then try again. make sure everything is put back together as it should be with hammer, spring, shim, back plate/velocity adjuster. check the sear and hammer for worn areas. change the hammer and valve body oring and make sure its a snug fit when you put it back in. also what kind of lube are you using? i tried SP slick one time in my a5 and caused recocking issues. when abck to tippmann pneamatic oil and that fixed it.