Is there a bounce problem w/ newest stock boards??

[don21]

My gun has been recently sent in to FEP to have the quests newest board/chip put in to fix the battery issue since i have a generation 1. After being sent in i heard of the new board is known to have bounce issues? this is kind of buming me out here...is this true about the newer quests?

what is the newest style board/softwear used in the newer models?


thanks for any help

[Blackrain7557]

newest board/chip i heard of was the gen2 board with the lucky ace chip...or the w.a.s. board...but everything has bounce thats why they invented DEBOUNCE programming...

[BloodyDeadDeer>Vomit]

WAS is hard to kill the bounce....lucky should be fine, I would upgrade to Ape they have an amazing board for an extremely reasonable price

[Tpantig]

I have a gen3 and have not had a single problem with bounce on my gat even using the factory settings with the debounce and this is with the trigger set both sloppy and tight. So using the WAS you should be just fine

[Faffi]

WAS has a decent amount of bounce.

At 1 you get a shit ton of bounce, like 1 trigger pull 2-3 shots
At 2 you only get bounce if you pull the trigger next to the top of it above the little curve it does
At 3+ from my experience you only get bounce when you start walking faster.

All this is gonna change however cause I have a APE board now!

[Blackrain7557]

WAS has a decent amount of bounce.

At 1 you get a **** ton of bounce, like 1 trigger pull 2-3 shots
At 2 you only get bounce if you pull the trigger next to the top of it above the little curve it does
At 3+ from my experience you only get bounce when you start walking faster.

All this is gonna change however cause I have a APE board now!

let us know how that works...i heard programming the thing was confusing as shit...im prolly gonna go virtue personally:eek:

[don21]

thanks for the info, but anything wrong with the origonal board in the quests like battery issues ect?