Shootdown Problem? PLEASE HELP!

[Fallinher0]

Alright i replaced all the bolt orings. Relubed EVERYTHING. Hpr and Lpr. I am able to shoot 2-3 shots at the set velocity but then it drops all the way to the point where the balls are rolling out of the barrel...

What do i do???

[bronc.v2]

Shootdown is a totally different problem. If you're not getting any bolt stick, then it means your dump chamber isn't being filled for some reason. First, check all the air holes in your bolt pin and make sure they area clear. Next, make sure the screw in the back of your bolt pin isn't screwed in too far and blocking any of the air holes. After that, take out your bolt and pin and check the air hole in the body that feeds your bolt and make sure it's clear to. It's easy to get it goo'ed up and blocked. If that all seems good, next check your HPR. Take it off and try another reg and see if that solves the problem. If it does, then your reg needs to be rebuilt. It it still has the same problem, try a new air tank. It could be the reg on your tank is shot. If it does the trick, then you need to rebuild your tanks reg.

That's pretty much all it can be. If you're not leaking or getting bolt stick, then it's a flow problem.

[Blackrain7557]

your tank might be messed up too...check your dwell or check that your asa is fine.

[bballryand316]

I had that problem, just raised my LPR up by like 10-15, and it's good.

[black/red outkast]

i have the same problem... my quest has never worked for more than a few games since i bought it used off the nation.... i even payed 120$ to get a new body from fep cuz they said htat was the problem... the gun worked for like a day and back to the crapper.... everything on the gun seems to be in working order however to get the bolt to cycle i had to raise the dwell to 15... which is so high that it chops britle paint more than it should... i think maybe its the W.A.S. board?

GL with your gun and if u find the solution be sure to post it up