WAS Board Tourney Lock

[ghost271]

In the instructions it states ' to short the two pads that say LOCK' in order to turn the tourney lock On and Off. However there is no 'Lock' printed on the board and I have no indication whatsoever where/what these two pads are. On top of that WAS' site has NO information listed for the Quest boards on their site. Its like they wiped their hands clean of any Quest tech support whatsoever.

A speedy response would be appreciated as I need this gun up and running for a tourney tommorow.

Thanks guys.

[bronc.v2]

There are 2 silver pads on it that look like they should have wires hooked to it or something, but don't. You just need to take a flat head screwdriver and bridge the two pads. But really, you shouldn't need to worry about turning it off and on. They can tell if it's on semi or ramp when you shoot it.

[ghost271]

Bronc,

A customer of mine has it on PSP and he's playing a 7 man event tommorow. It seems to have been locked out somehow. Are these the two little silver 'squares' beneath the trigger switch?

[Physcojosh]

Bronc,

A customer of mine has it on PSP and he's playing a 7 man event tommorow. It seems to have been locked out somehow. Are these the two little silver 'squares' beneath the trigger switch?

here it is :P easiest way is to stick a paper clip inbetween.. i could never get a screwdriver to work >.<

http://i2.photobucket.com/albums/y47/physcojosh/Picture127.jpg

[ghost271]

Thanks Bro !

[bronc.v2]

:tup:

[ghost271]

I had actually tried it earlier with allen keys but it wouldn't work for whatever reason. Got the flathead screwdriver and it was 'good to go'.

[VC_UPROAR]

Nice job Physcojosh

[impypballr47]

ty phsyscojosh ive been trying to figure that out for about a week now.

=)

[Physcojosh]

ty phsyscojosh ive been trying to figure that out for about a week now.

=)

dont worry its what i do :P