PDA

View Full Version : Lucky Board

506guballer
03-12-2007, 04:43 PM
I believe I have a lucky board as the manual for the WAS board doesn't seem to match. I've searched for a thread on here with instructions for the lucky board but didn't find one. Does anyone know how to program the lucky board? Just got me Quest yesterday in the mail. It rips but am running into leak problems sometimes around the LPR area and sometimes at the ASA. Been using both HPand LP tanks both leak. Will try to figure it out when I get more air.
Blackrain7557
03-12-2007, 04:47 PM
is the board white with lucky on it? as for leaks...relube everything replace orings, check your tank orings, turn down the pressure to 90-100,
Physcojosh
03-12-2007, 04:53 PM
I believe I have a lucky board as the manual for the WAS board doesn't seem to match. I've searched for a thread on here with instructions for the lucky board but didn't find one. Does anyone know how to program the lucky board? Just got me Quest yesterday in the mail. It rips but am running into leak problems sometimes around the LPR area and sometimes at the ASA. Been using both HPand LP tanks both leak. Will try to figure it out when I get more air.

If your Really low on Air ie 500Psi or Less, and its new, it tends to Leak untill its Well broken in...

When you say around the lpr, is it comming .. out of the LPR or under it , where the HPR goes.. for Asa its would be Tank Oring,Lack of Air, or Macro fitting..

, cant help you on the lucky ACE manual... i cant find it in the UK store area >.<
Angie_p8ntball.be
03-12-2007, 04:55 PM
If you have a Ace coded board http://www.lucky-paintball.com/Ace.pdf
If you have a Spitfire board code board http://www.lucky-paintball.com/SpitfireBoard.pdf
Physcojosh
03-12-2007, 05:05 PM
If you have a Ace coded board http://www.lucky-paintball.com/Ace.pdf
If you have a Spitfire board code board http://www.lucky-paintball.com/SpitfireBoard.pdf

youy rock!
506guballer
03-12-2007, 05:12 PM
If your Really low on Air ie 500Psi or Less, and its new, it tends to Leak untill its Well broken in...

When you say around the lpr, is it comming .. out of the LPR or under it , where the HPR goes.. for Asa its would be Tank Oring,Lack of Air, or Macro fitting..

, cant help you on the lucky ACE manual... i cant find it in the UK store area >.<

Hey bro,
Thanks for the reply. Its weird but I had leaks in different areas especially after adjusting the LPR and HPR. I used both a LP tank and then an HP tank cuz I ran out of air. I noticed the leaks at first coming out from under the LPR. After some adjustments it came directly out of the LPR. Finally I was able to stop the leak and I dry fired it like crazy. :) Then I put on my HP tank and there was an ASA leak. changed the tank o-ring, the macro line seemed to leak a little but it went away.....it later leaked in the LPR. I basically I need to get me some more air to pinpoint what is causing it and then get it chronoed, fire a case through it and hopefully that'll get it to work. Thanks for the advice. Keep it coming. Also I think I'm the first one on the island of Guam with this marker. Mahalo bro.
506guballer
03-12-2007, 05:15 PM
If you have a Ace coded board http://www.lucky-paintball.com/Ace.pdf
If you have a Spitfire board code board http://www.lucky-paintball.com/SpitfireBoard.pdf

Thanks for the info. I'm not sure what board I have as I don't have the allen wrench size to verify but as soon as I can open the grip I'll make use of the instructions. :evilgrin: