Upgrading the silver bullet

[tec021990]

I know it is mostly compatable with the spyders my questions are first off can I put the t board as well as eyes and are the trigger frames interchangeable? Also what regulators will fit it and will a long spyder boblong bolt fit it correctly(same style but Im unsure of length and all).

[24/7 p8ntballer]

yes to every thing exept i dont understand what your talking about with the bolt if I were u I wouldn't upgarde it just buy an Ion thats what I did

[xball16]

Maybe he dosnt want an ion?

But any reg should fit, just about all the trigger frames are interchangable but you will need to use the screws that came with the silver bullet to mount the new frame. And as for the bolt. It should fit

[tec021990]

Thank you all. Also is there anything that can NOT work from a spyder on the silver bullet? Like can the silver bullet take eyes? Also bout the ion I simply dont want to comform to the gun everyone uses and I love the feel of my little silver bullet just has a few small things I would like changed.

[paintCALLY]

put a cp reg. def. one of the best... and looks great too

[CaptainGuevara]

I have a silver bullet and an ion, the ion i think is much better, but i think if i upgraded the silver bullet i would like it just as much. One upgrade i do have is a Spartparts Progressive barrel, it looks amazing on the silver bullet and it shoots dead accurate. have you figured out the trigger yet? if not, take off the grip frame, looking from the top there is a small screw near the end of the top of the trigger, screw it in to have a longer pull and screw it out to have a shorter pull, although if you screw it out too much it won't come out enough to release the firing button.

[typbjunkie]

I owned a silver bullet for about two years, and while I owned it I had a spyder AMG, and a Bob Long Lasoya Timmy, the things that I found were that the bob long bolt does not work in the silver bullet but the spyder one does, also the t-bord will not fit becaues I had one in the AMG and the holes for the screwes are not in the same place, but if you put a spyder trigger frame on it, it should work out fine.

theres my 2 cents