Icon E Help

[Captain_Rexx]

Hey my buddy just game me an Icon E to see if I can get it working he said he bought it and it just didn't it work he tried to get them to replace it but they didn't. Ok here is the problem I air it up turn it on with a working battery but I just get a clicking noise and the bolt is in the back position let me know if this is an easy fix

[mark1975]

Make sure you are using a New duracell or Energizer battery. If that does not fix it, Call Paintball Solutions for parts or repair.

[Lucch14]

i had the same problem. Just look in the owners manual and you can e-mail 32 Degrees and they can give you some solutions or you can send it back to them with a sheet listing the problem and they'll fix it. They fixed mine and gave me a free rechargeable battry and it works great

[Captain_Rexx]

Yeah I contacted them they said it was because it isn't getting enough power so it is a battery even though i put a brand new battery in it but it will probably get to the point where i have to send it in

[RealJazzE]

You can try this trick that I did with my Icon-E a while back. Try putting a coin behind the solenoid disk. You can try a dime, nickel or quarter (I had to sand the edges of the quarter). This reduces the distance that the solenoid has to travel and it will fire with lower battery power. Start with the slimmest (dime) and try it move up to the thickest (quarter) as necessary. It worked for my marker with a quarter. I only needed to do this for a few months, later it wouldn't fire with it on and I took it out.

This is a quick fix that I read online somewhere when I had that same problem.

[Wildhorse351]

The fix for that should be really simple actually. Ive seen this before. What you have to with those rechargable paintball batteries, is charge them for 22 hours or so. If all you get is a soleniod click then your simply just not getting enough power. Try to charge it for that time and it should work just fine.