pt extreme leak

[Ionspeed417]

i just bought a pt extreme and i put the c0² in it leaks in the spot where the puncture pin is. Also i dont know if it matters but i have the latch style pt extreme, i say this bc my brother has the screw in type and i dont know if its different

[P_E_P_84]

did you try turning the knob that's near the hinge towards the puncture point, the 12 gram might need to be seated closer to puncture point

[GaNgStApImPiN]

Ive had the same problem try fixing the flux cappasitor

[Ionspeed417]

u mean cupseal retard

[SilentDeath12886]

or repalce the small oring right next to the puncture pin. most times that is the culprit. because a lot of people release the 12 grams whent here is still co2 left in the canister and causes the orings to deform when the co2 bleeds out the sides of the oring. to prevent from happeneing again jsut keep recocking until there is absolutely no air left. ive been doing that and havent had a problem yet.