PT Extreme Feed Tube

[railz]

Anyone know where I could buy a feed tube/magazine for a PT Extreme?

[mark1975]

http://www.pbn5.com/paintball/merchant.mvc?Screen=PROD&Product_Code=1009408&Category_Code=
Delta feedtubes will fit

[kohburn]

how about a replacement puncture pin? the seal on mine are visibly cracked and leaking.

[JDizzle619]

<3

[hiei101]

how about a replacement puncture pin? the seal on mine are visibly cracked and leaking.

i need to know this too

[kohburn]

i need to know this too

I did a lot of searching and the best I could find was to take the 12gram asa apart to remove the old seal and use a 3/8" OD, 1/8" ID, 1/8" thick o-ring as the new seal.

when I took mine apart there is also an o-ring between the valve assembly and the 12gram asa pin assembly that was visibly old and dead, it also could have been a source of the leak. not sure the size on that one but i got a replacement at the hardware store. I'll be trying this out later tonight.

if that doesn't do it then I'm just going to seal the damn thing with sylicon and use a bottom line.

[hiei101]

k, i'd appreciate it if you could post what you did and if it worked