Took the Bolt out...

[Teekay92]

and it wont go back in. I have a Icon E and i took the bolt out to clean it and when i put the parts in order to go in the bottem part that goes with the bolt wont go in. Help

[Rudeb0y]

the bottom piece wont go in if ur grip is attached to the frame...so unscrew the two screws..disconnect the frame from the grip then that bottom piece will fit in.... then u can screw the frame to the grip

[rockerdude1]

when u put it in and it gets to the stick point pull the trigger and push the back of the bolt at the same time

[Emmortel]

This freaked me out the first time too. You have to take the trigger frame off from the bolt. Or just turn it on, and click the trigger while pushing on the bolt. It'll go in after that.

[SP-PIZZA-NERVE]

the bottom piece wont go in if ur grip is attached to the frame...so unscrew the two screws..disconnect the frame from the grip then that bottom piece will fit in.... then u can screw the frame to the grip

:crash:

[Teekay92]

I figured out how. the silver thing (forget the name) u gota push the end in and then put it in