Gun JAm!!! Help!!!

[Teekay92]

I went to Ginos today and my bolt got jamed bc i was choping paint. What should I do?!?!

[Ta-kun]

Take it apart clean it and lube it.

[Teekay92]

i cant bc the bolts stuck and wont come out

[Soopa Villain17]

i cant bc the bolts stuck and wont come out

well what kind of 3 dgrees gun do you have ? if its just a mech then try and rinse the paint out or just pull really hard on the bolt. this is what i had to do on my brass eagle raptor many years ago when i broke paint in the breach and it all kinda got stuck in there real tight. give it a good pull. take some pics to, that may help

[Teekay92]

Its a Icon E

[Soopa Villain17]

ok so its got an electric grip ? just pull the bolt realy realy realy hard and it will come out. try to push it out the front if you can.

[george942]

The reason its jammed is because theres a shell in between the body and the bolt, just take the bolt and pull really really hard and it should come out

[Teekay92]

I got it out. I pulled on it hard but it wouldent budge. so i put a few drops of water and shook it around untill i got some of the shell piece smaller and put some oil and pushed it fowerd. then it went right back

[Rudeb0y]

dude i had the same problem u had....just take the whole thing apart clean it and lube it you'll be fine...i have an Icon E as well

[Teekay92]

yeah i bought gun oil today. now that i got it unjamed im gona take it apart. (first time) any tips on removing/putting back the parts.