Trigger

[Teekay92]

Any way to move the triger closer to the contact point?

Also does anyone have pics on taking the bolt out and back in or can get them. thanks

[SP-PIZZA-NERVE]

look at the stickies for spyder

[IconZ213]

look at the stickies for spyder

How would grips make the trigger pull shorter?

[Teekay92]

Its not grips its "theads".

Also i cant find anything in the spyder section

[Rudeb0y]

yea i've been trying to figure out a way to move my trigger closer to the contact point...so far no success

[Teekay92]

I asked the guy at National and he said u cant

[Rudeb0y]

yea i figured

[Kenangelamuna]

If it is a mechanical trigger then forget it, but if it is an electronic trigger then your adjustments are one the trigger itself. Note. You may have to pull off the trigger frame to adjust it.

[Kenangelamuna]

look up the spyder sticky's on disassembly to remove the bolt

[xball16]

A realy easy way to move the trigger would be to take off the frame and put sumthing over the trigger such as a peice of paper.

[Teekay92]

I could see a peice of paper working. My guns a Icon E

[Rudeb0y]

yeah im gonna try n alter my trigger in some way to make it closer to the contact point

[Teekay92]

If it works Give me Pics!!

[Teekay92]

I may take the frame off any tips. If i find a way ill post on it and pics too

[crazychipmunk]

just take out the trigger spring then adjust the trigger with the screw on top of it note that it will only get tight when you push the frame on to the body. I did it to my spyder E99 same frame as your marker. Now it is resting on the switch.
you will need to wack out the trigger pin to do this. this is detailed in one of the spyder stickies i think.