so I just won a quest and have a problem...

[cjm555]

i take it out and air it up and it leaks out the back of the valve system. i lubed the back orings alittle more and still no good. what should I do?

[LU_aDaK]

Valve system? My advice would be copy a pic of a quest, stick it in MS paint and circle the area your leaking from. (host @ imageshack.us).

[Uiruru]

Is it leaking out of the allen wrench hole in the back of the bolt stem(black part)? If my guess is correct they forgot to loctite the air plug in there. Worst case scenario send it to FEP and you'll have a fixed gun in a couple days.

[Pooner]

hahah curt, mine works fine! i even test shot it at the feild! hahahha

[Pooner]

i have a Question to add to this Thread as well (were on the same team)

what board doyou think we have. it has all the modes. any wild guess? is there such thing as a WASP?

[cjm555]

alex...read the manual it says it in there.
and is is the bolt stem(black part) but its not the plug. its comming from like the threaded part. I'm workin on the pics now

*edit*
http://i3.photobucket.com/albums/y60/cjm555/quest002.jpg

like i said its coming from under the bolt stem and i cant figure it out

[ShockerGEEk]

More then likely it just has a nicked o-ring. Replace the back oring on the bolt stem.
The board is called an Equalizer board. It is made by Wicked Air Sportz (WAS). WAS board is what most people call it though.

[Pooner]

Danke Schon (for all you germans out there)

thanks! on my question at least.

[cjm555]

thanks for all the help guys! i would try it now but people are goin to bed at home so i will try things tomorow and let ya know what happens

[6speed]

cjm555, try unscrewing the bolt stem only a quarter turn out and then tighting it back in while it's aired up. Sometimes it helps it to seal up.

[cjm555]

well none of the things you said helped:S

I'm going to bring it up to the field i got it from and let them deal with it

[avangusva]

Make it so that the screws are flush with the body, tightening them doesnt stop any leaking. Turn them 1/4 of a turn from flush with the body in either direction untill it stops leaking.

[bEaNer-In_CalI]

alex...read the manual it says it in there.
and is is the bolt stem(black part) but its not the plug. its comming from like the threaded part. I'm workin on the pics now

*edit*
http://i3.photobucket.com/albums/y60/cjm555/quest002.jpg

like i said its coming from under the bolt stem and i cant figure it out

is it leaking out of those little hoses?

[cjm555]

im prety sure its not. but i have no more air and I'm gona bring it to the place i won it from and they said they would fix it so thanks for all the help!