O-Rings? Where are they?

[JRLettau]

Hey fellas,

I've been trying to find a place that carries the o-ring sizes that the Quet uses. I have checked all the local hardware stores, as well as Lowes, Home Depot, but I have not been able to find a place that carries the sizes needed. I found the place that the O-rings would be, but they dont have any in the thinner size. Has anyone found a place that carries these o-rings?

Thanks guys.

[LU_aDaK]

markerkits.com

[bronc.v2]

ACE hardware carries them all, at least mine does, EXCEPT the center purple o-ring on the bolt. :tup:

[JRLettau]

ACE hardware carries them all, at least mine does, EXCEPT the center purple o-ring on the bolt. :tup:

I checked my local Ace Hardware, they didn't have the smallers sizes. Were the ones that you got in the plumbing dept?

[LU_aDaK]

Are you all out? or just trying to stock up? i have the markerkits quest oring set. I will send you a couple if your in dire need.

[JRLettau]

I dont need one now. Right after I got my Quest I had to replace one of the back pin o-rings. I used the one in the o-ring can and I dont have another, I wanted to stock up on all of the o-rings for the future. Thanks for the offer though. Since it is the end of the season, I think I will survive till spring.

I just checked out markerkits.com, looks like I will be ordering one of those o-ring kits.
Thanks!!

[XMAILMANX]

Do a search on Ebay, Type in FEP Quest, there's a company that sells an oring kit with tools and lube. Slick honey if I remember correct. GL

[jeffreyjames]

mcmaster-carr has them all. in bulk. and the proper 1/16 thickness instead of the 1/8 some hardware stores carry.