how do I set it to psp with was board that I hate with all my life

[rockmehard]

Yup right now its on semi monitoring the bolt.So can anyone please help me set this piece of crap board..

Thanks!

[gremlin75]

Go into programing mode (make sure the tourny lock is off. Hold down the trigger and turn the gun on)

Now cycle through the led's till you get to white (pull the trigger till you get to white)

Once at white hold the trigger down till the led goes off. The board will then flash the led to show what the mifing mode is currently set at(semi is one)

Once its done flashing pull the trigger 2 times to set it to PSP. Wait till the board flashes to show that programing is complete and you are done.

p.s all this info was gotten from the manual in the sticky ;)

later
gremlin

[rockmehard]

lol.sorry I was in a rush.And I dont make enough threads here so I think I should contribute and make this more active!!
thanks.

But also will the gun be capped at 15?I have it monitoring the bolt.

[DoMiNaNt]

if its monitoring the bolt then no, its uncapped

to cap it hold the trigger turn the gun on go to yellow hold the trigger on yellow when it turns off and turns back on youll be in eye mode programing and pull the trigger twice wait 5 seconds rainbow after its done turn gun off and its capped at whatever your ROF is at

ROF is purple in programing mode, so do the same with what i just said above with yellow except go to purple and pull trigger 15 (or whatever you wanna cap at) times

hope i helped

[gremlin75]

Yep it will be capped at 15bps with ramping after 3 pulls in psp mode

later
gremlin