quick question about the HPR washer

[DoMiNaNt]

ok, i just bought my quest today and i love it,the settings were perfect because it was pro owned by avery of FEP...probably one of, if not the best shooting gun ive shot..when i got home today i lubed the reg, but didnt take notice to which way the HPR washer(gold washer in the reg) went in...im not sure if it matters but which side of the washer should be facing the top of the reg(towards the barrel) and which side should be facing the bottom(towards the hpr adjuster)

thanks

[DoMiNaNt]

oh i forgot that no one lubes their regs :dodgy:

serioulsy though does anyone know..i doubt it matters but im just curious as to if it does or not

[DoMiNaNt]

ok then

[bronc.v2]

Check out the stickies. They have detailed technical pics of the reg taken apart and how the parts go back together. :tup:

[DoMiNaNt]

nope stickies dont show a thing on how to lube or put the reg back together so i dont know what you were talkin about...the only thing i saw were parts exploded and the link it redirected you to geocities site that wasnt working...

[DarkDreams63b]

i have the same question!

[tomA]

My question is how do I get the piston out of the reg.I tried pulling from the bottom and it wouldn't come and I tried pushing from the top and nothing moved.
Maby Dale or Rich will see this and set all of us straight.

[Deep Sea]

My washer is completely flat, with a small hole in the middle, how can you tell one side from the other?

tom, piston should come out by pulling, small set of needle nose works well for me

[LU_aDaK]

When I get home I will open my reg and check for you.....But that wont be for 7hours :(

[evileric77]

Merry Christmas. You have to pull pretty hard to get the piston out. Doesn't really matter which way you put the washer back in.

http://img330.imageshack.us/img330/9286/dsc01256dr2.jpg
http://img65.imageshack.us/img65/5345/dsc01253xr4.jpg