Getting a quest real soon...quick questions

[DoMiNaNt]

hello im going to be joining the FEP family soon but have a few questions.

Is the quests noid one like smartparts that needs to be cleaned on a regular basis or is it more like the egos which is mostly infrequent (around once a month to be on the safe side) also is there a thread on how to clean the noid if its necisarry...i checked stickys but didnt have much luck...any help would be appriciated

[The EastCoast Kid]

its the same noid used in dm4's and dm5's i also belive its simmilar if not the same as the impulse noid. as for maintenence im not so sure.

[bronc.v2]

Solenoids shouldn't really require regular maintence or cleaning.

If it does get gunked up, since it's the same as the DM's noid, you can just follow the directions over in that forum on how to take it apart and clean it.

[Lost One]

Manual doesn't mention noid maintenance at all, so I'm guessing they don't think it needs it. :)

[NYGuardians capt.]

its the same noid used in dm4's and dm5's i also belive its simmilar if not the same as the impulse noid. as for maintenence im not so sure.
its a dm noid and it is no where near the impy noid by any means, the dm6 noid is kinda like the impy noid but the dm3-C, pm5 and quest noid is totally different

[evileric77]

hello im going to be joining the FEP family soon but have a few questions.

Is the quests noid one like smartparts that needs to be cleaned on a regular basis or is it more like the egos which is mostly infrequent (around once a month to be on the safe side) also is there a thread on how to clean the noid if its necisarry...i checked stickys but didnt have much luck...any help would be appriciated

I assume you were talking about the shocker?

"Solenoid maintenance is suggested every 20,000 pressurized cycles, or every two months, whichever comes first."

from zdspb.com

I don't do noid work until about 6 months on all my guns. lol