Quest Shooting Slow

[paintballtip]

Ok,I Got My Quest And It Seems Like (With Paint) Its Capped And Its Shooting Slow....I Turn The Eyes Off And Its Shoots FAST (I Have It In Uncapped Semi 6 RED Blinks) Btw I Have A NOX Chip And My Eyes Are NOT Dirty,My Battery Is Brand New.The Gun Reads Blue When A Ball Is In The Breach...CAN ANYONE HELP ME????Im Completely Lost Man....:confused:

[LU_aDaK]

if it was was I could help, but I dont have nox...sorry bro. I would contact nox to make sure you have the settings right, if you have a loader delay, or eye delay set to high you will be SOL. I had that problem with an old gen 1 I had..

[Swantonbomboy]

check your bounce settings, eye delay settings

[kingpen509]

With NOX uncapped semi is one red blink. I'm not sure what 6 is but that might be another uncapped semi I'm just telling you what my marker is on.

[surfguy1936]

did u ever fix it casue i have the same problem w/ my NOx board

[p8nt4brainz]

Firing mode 6 is uncapped semi, but can use mode modifiers. A good place to start is by resetting to factory default settings.

Manual:

[ShockerGEEk]

If I remember right when you go to a setting and its value starts at a certain number like say 5....and you want it on 6 you just have to pull the trigger one time. You dont have to pull it 6 times...if you do you will change that setting to 11. I remember having this trouble when I first got my NOX chip. Once you get used to changing the setting, its becomes alot easier. ALso the guys at NOX will help you out anyway they can...at least they did me.