Confused about NOX setting on Quest ?????? [Archive]

kingpen509

10-16-2006, 12:49 PM

Ok so I took my Quest out this weekend and at the end of the day I decided to empty a couple hoppers in semi just to have a little fun. I emptied the first one and all was fine. It was shooting just as it always does, fast as hell. Then my buddy emptied one and gave it back and ever since it has been shooting slow like its in capped semi. But I checked the settings and I believe it is in uncapped semi as it should be. (one red blink)

I cleaned and relubed the bolt (nothing) I restored factory settings to the NOX (nothing) I'm almost to the point where I'm asking myself if I'm just firing slow or what. It shoots extremely even like its ramping at like 10 or 12 bps. I'm just confused.

Anyone have any advice for me as to what to do? Should I put the stock chip back in it?

Thanks

KP

p8nt4brainz

10-16-2006, 01:57 PM

What color is showing up on the LED? You may have dirty eyes and are being capped at the bypass rof (12 bps default setting). You should see the LED blinking blue/yellow for the deafult color palette if this is the case.