IMPORTANT! All Marq Owners Read Here!

[moosecakes]

Ok so last night at practice i was running into some issues with my onyx.
It the bolt would only move half way and not complete its cycle. So after about an hour of messing with it bjorn realises that the back bolt peice needs to line up with all the holes on the bolt body!
When you take the peice with 3 brass prongs on it out, make sure you line the hole on the bottom of that peice up with the holes on the rest of the bolt or else it will not work!

[~Spoon~]

Good to know!

[96 Ls lnteg]

Ok so last night at practice i was running into some issues with my onyx.
It the bolt would only move half way and not complete its cycle. So after about an hour of messing with it bjorn realises that the back bolt peice needs to line up with all the holes on the bolt body!
When you take the peice with 3 brass prongs on it out, make sure you line the hole on the bottom of that peice up with the holes on the rest of the bolt or else it will not work!


Bjorn showed me that in SanDiego

[moosecakes]

Damn bjorn, i took like an hour out of his practice while he messed around with it then finally hes like Oh shit! dude! its in upsidown!!!

[Swantonbomboy]

not really following. Would it be possible to get pics of what you are saying for everyone.

[moosecakes]

take your bolt out.
Now flip the bolt upsidedown, look down the entire bolt, there should be 3 small air holes, those all need to be lined up with the bottom of the end peice of the bolt.
I will get pics tommorow, have practice tonight.

[paintballkilla*]

ya they stressed thAT AT CUP

[webmstrk9]

the 3 holes on the bottom of the bolt for the airways, I presume?

http://i49.photobucket.com/albums/f257/dt3ft/anionyx2.gif

[Zion_Lion]

^those are it, airways with arrows pointing at them