PDA

View Full Version : Tournament lock?

olegodo
08-14-2006, 09:53 AM
Could someone tell me how to activate the tournament lock on the WAS board? i said in the manual to short the two pads on the board labeled "lock" while turning on the marker.
however there is no label of any kind on my board, atleast not that i can see.
someone please help me :)
Gailon
08-14-2006, 11:39 AM
You don't even have to scroll down half a page to find this thread about tournament lock. You coulda posted there and ask for pics...

http://www.pbnation.com/showthread.php?t=1700874
olegodo
08-14-2006, 11:44 AM
sorry :)
My bad
Intense One
08-14-2006, 04:56 PM
Can anyone send pict's on this tourney lock info, or send a more detailed description on the there aren't pictures on the link gallion attached... sorry guys, I am good at this stuff, but don't want to screw the board up!
Physcojosh
08-14-2006, 04:59 PM
its 2 Flat Pads just below the MicroSwitch, it isnt label ...
Intense One
08-14-2006, 05:04 PM
Kauai- THANKs, but I'm not going to mess with it... Steve
paintballer20034
08-14-2006, 10:21 PM
the two pads wont short out for me i dont get it
is there anyone that could do a lil vid b/c i dont think pics will work
Intense One
08-15-2006, 05:54 PM
It is really easy, finally called dale and did mine today.
ON new WAS board, LED is white box.
To the left of the LED where WAS is upside down are 2 metal squares with holes in them.
Use a paper clip, cut in 2 and hold it in both holes.
turn gun on, you will see the red blue indicating lock.

Hope this helps... Thanks to Dale at FEP!
Physcojosh
08-15-2006, 08:11 PM
It is really easy, finally called dale and did mine today.
ON new WAS board, LED is white box.
To the left of the LED where WAS is upside down are 2 metal squares with holes in them.
Use a paper clip, cut in 2 and hold it in both holes.
turn gun on, you will see the red blue indicating lock.

Hope this helps... Thanks to Dale at FEP!

My bad.. I shoulda said you need to Stick stuff in them lol! Sorry about that..
Intense One
08-16-2006, 07:01 AM
Kauai, No biggie... got it done, and now we got exact directions on the thread!
olegodo
08-16-2006, 09:00 AM
yes, got mine working to, i thought it was those two metal squares, i just didnt want to try until i was shure. thanks for the help