Noid problem

[broncos567]

For some reason, my quest's noid won't click when the trigger is pulled. The microswitch is being activated and the board is registering a pull but the noid doesnt work. The gun still fires when I push the noid reset button with air in it. All the wires appear to be in good shape and all connections are sound. Does anyone have any idea what the problem is and how it can be fixed?

Thanks

[olegodo]

This happend to mine to some times.
the led blinked when i pulled the trigger, but the gun wouldnt fire.
all wires and connections were fine.
when this happend i just took out the battery and re inserted it withoud disconnecting it and the marker shott fine again.. weeeery weird stuff..
i have sendt my quest inn to fep now for a few reasons, hope this bug is fixed when i get it back.. i love that marker!

[broncos567]

Nah, that isn't the problem, thanks for the tip though.

[cdimic]

call FEP

[gremlin75]

First of all replace the battery with a brand new one. If that doesnt work then make sure the wires are plugged in all the way. If still nothing call FEP.

later
gremlin

[jeffreyjames]

sounds like you have it covered, but check your trigger sets too. try a new battery and check plug connections(theres one between the noid and board you might not see unless you take it out). otherwise call fep and they will take care of you.

[broncos567]

Yea, I think it's the main wire harness. Does anyone know how I can get a new one?

[gremlin75]

Call up FEP....they'll take care of you Im sure 805-487-5297

later
gremlin

[broncos567]

thanks I'll try that

[FallNAngel]

make sure you have the dwell set high enough.

[Physcojosh]

ITs your Damn Noid Connection.. mine did that last week. .. i couldnt figure for the life of me what happend.. turns out under the little black Connectors on thenoid it came seperated a little bit... I had to resolder mine...

[broncos567]

thanks for all the tips, im gonna get a new wire harness from FEP and check the noid connectors

[crazy horse]

ask for dave at fep